Sanyo CE42LM4WPN-NA Owner's manual - Page 10
Specifica, Tions / Helpful, Hints / Hotel - dimensions
UPC - 086483065156
View all Sanyo CE42LM4WPN-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
SPECIFICATIONS / HELPFUL HINTS / HOTEL MODE Specification Common specification Power source 100~240V 60Hz AV terminal AV1: CENELEC Standard (Peritel) Input: Composite video, RGB and audio-L/R Output: TV-output with composite video and audio-L/R AV2: BNC Input: RGB, H and V / Y, Pb, Pr audio-L/R Output: RGB, H and V / Y, Pb, Pr AV3: BNC Input: Composite video Output: Composite video Audio M.Out: CINCH L/R HDMI Input : HDMI GROUP Standard PC Input Serial port: RS232C: INput/Output Net Organiser: POA-LN01 (optional) When ordering these products, give the Name and Type No. to the sales dealer. CE42LM4WPN-NA Contrast Ratio Screen(inches/ cm) (viewing measured diagonally) Display Resolution 800:1 42"/ 107cm 1366 X 768 (WXGA) Viewing angles H:178°, V:178° Dimensions (WxHxDinch) 41.34" x 25.74" x 6.37" (WxHxDmm) 1050mm x 654mm x 162mm Weight 88.2lbs/40Kg Helpful hints ■ NO PICTURE ● Check if monitor is plugged in. ● Try a different channel, if OK, probably station trouble. ■ POOR PICTURE, ● Adjust BRIGHTNESS control. ■ NO COLOR, PICTURE OK ● Adjust COLOR control. ● Is the programme in color? Hotel Mode The following faults are not caused by the receiver: "INTERFERENCE" Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be a temporary condition, but should this interference persist, contact your dealer. This LCD monitor set allows you to set up the following: SETTING PROCEDURE: 1 . Press and hold the green button on the Remote control handset and then press the 5 button on the Monitor for 5 seconds. Hotel Hotel mode On program Preset Address Baud Rate ON / OFF OFF/ 1~99 / AV1-AV3 /RGB/ HDMI/ PC ON / OFF 007 19200 : Select : Adjust MENU : Exit 2. Use the 5 or 6 button to highlight Hotel Mode, use the 1 to switch ON or OFF. 3. Select ON program using the 6 button, select the start up position using the 1 or 2 buttons. (AV2 - AV1 - 0 - 1 - 2 - 3 - 4 ........99) 4. Press the MENU button to exit from the menu. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. 10