Sanyo DWM400 Instruction Manual - Page 28

MP3 CD OPERATION Before Starting This unit can play back the CD that has recorded music data, MP3 files. • The file system is ISO9660 Level 1 and Level 2. • If the CD has both audio CD tracks and MP3 files, only audio CD tracks are played. • It would take 30 seconds or more for this unit to read MP3 files depending on its structure. • This unit can recognize up to 256 files or folders per disc. The CD with 257 files or folders and over is not available to this unit. • MP3 CDs may not be played in the recorded order. 1. Please use the MP3 software with the function that can record data alphabetically or numerically. 2. Please refrain from making many sub-folders by preference. However, some CD-R/RWs cannot be played back depending on the recording conditions. Before playing back MP3 files, please read the following. MP3 CD • MP3 files must have the extension letters, ".MP3" or ".mp3". • Standard, sampling frequency, and the bit rate: MPEG-1 Audio 32kHz, 44.1kHz, 48kHz 32kbps ~ 320kbps (constant bit rate or variable bit rate) • The recommended recording setting for a high-quality sound is 44.1kHz of sampling frequency and 128kbps of constant bit rate. LIMITATIONS ON DISPLAY Available letters for display are the following: capital or small alphabets of A through Z, and numbers of 0 through 9. CAUTION: • Some MP3 CDs cannot be played back depending on the recording conditions. • The CD has no music data or non-MP3 files cannot be played back. • The WMA files cannot be played back. MP3 CD Playback ENT n (Stop) Number z /ON AUDIO SUBTITLE OPEN/CLOSE RANDOM ZOOM ANGLE REPEAT A-B REPEAT b RETURN TOP MENU MENU 4 ENT a 5 SETUP ON SCREEN SLOW SEARCH MODE PAUSE/ STEP PREV NEXT REV 1 4 7 PLAY FWD PROGRAM 23 560 8 9 +10 5 1. Load the disc with the label facing up on the disc tray. (Please refer to "BASIC OPERATION" on page E15.) • "FILE" screen appears. Note: Some discs may start playback automatically. 2. To select the folder or file, do one of the following: • Press the number button(s). Example: To select No.3, press [3]. To select No.10, press [+10], then [0]. To select No.24, press [+10], [+10], then [4]. • Press [p] to select the folder or file, and press [ENT]. • The file menu of the selected folder appears. • If the file is selected, the selected file playback starts. 3. Repeat step 2 to select the file in the file menu. Playback starts. Note: If the disc is loaded with the label side downward, or if a badly scratched disc is loaded, "NO DISC" or "NO PLAY" appears on the TV screen. If this occurs, load the disc correctly or replace the disc. Stopping Playback Press [n] during playback. Need help? Call 1-800-813-3435 DWM-400/US (new)English 28 -E27- 4/26/04, 11:49 AM