Sanyo FWSB405F Owners Manual - Page 11

Adjust the volume Use your Soundbar Adjusting the volume (default: level 10) 1) To increase or decrease volume, press VOL +/- on remote control. • To mute sound, press on remote control. - When the mute on, the POWER indicator on the front panel of main unit blinks in red. - When the mute off, the POWER indicator stop blink and light off. • To restore the sound, press again or press VOL +/-. Volume 0ʙ5 6 ʙ11 12 ʙ 17 18 ʙ 23 24 ʙ 29 LED display Behavior Lights up for 3 seconds (default: level 10) • When pressing [VOL+/-], the indicator will show the current volume. Pressing [VOL+/-] while the current volume is shown will increase/decrease the volume. • Pressing and holding [VOL+] or [VOL-] will increase or decrease the volume and the indicator will blink. When the volume has reached the maximum or minimum, the indicator will stop blinking. Note(s): • The volume might be influenced by MP3 or Bluethooth player. If the volume is too low, adjust the volume on the connected device. • If the volume level is set above 15 when the Soundbar is turned Off, the volume will automatically be reset to 15 when the Soundbar is turned back On. EN - 11 -