Sanyo FWSB405F Owners Manual - Page 13

Play audio through bluetooth 1) Press on the remote control to switch the Soundbar to Bluetooth mode. 2) Turn On the Bluetooth compatible device. 3) On the Bluetooth device, switch on Bluetooth, search for and select SANYO_FWSB405F (see the user manual of the Bluetooth device on how to enable Bluetooth). • If a Passcode is requested, enter "0000". • If the Soundbar name does not appear on the Bluetooth compatible device, press on the remote control. 4) Play music on the connected Bluetooth compatible device. 5) To exit Bluetooth mode, press one of the other audio input source buttons on the remote control. PAIR indicator behavior The arrow indicates the passage of time. The current status of Bluetooth and the procedures to complete Bluetooth connection for Bluetooth playback. Waiting for a new Bluetooth Device to connect (Status: Pairing). 1 Blinks twice → Light off → Repeats On the Bluetooth Device to connect, select the Soundbar's name (*1), then connect. A Bluetooth Device is connected. 2 Remains lit Music can be played from the connected Bluetooth Device (*2). No Bluetooth Device is connected. To reconnect with the last 3 Blinks slowly connected Bluetooth Device, press (*2). Trying to connect with the last connected Bluetooth Device. 4 Blinks rapidly Enable Bluetooth on the last connected Bluetooth Device and wait a moment (*2). Either another audio input is selected or the Soundbar is in Standby. 5 Remains unlit If the POWER indicator is On (Status: Standby), press to turn On the Soundbar. When the POWER indicator is Off and any orange indicator is On, press . The (Bluetooth) indicator will start blinking or light up. Follow 1-4 in this chart. *1 This Soundbar's name is "SANYO_FWSB405F". If this Soundbar has already been registered to a Bluetooth Device and the connection fails, delete it (or deactivate it), then press and select this Sound bar's name to connect. *2 To play music from a different Bluetooth Device, press connect . (*1) , then select this Soundbar's name on the Bluetooth Device to Note(s): • If reconnecting the Bluetooth device to the Soundbar fails, delete the registered profile of this Soundbar from the Bluetooth device, then perform pairing again. This unit can store up to 4 device profiles. • The music streaming may be interrupted by obstacles between the device and Soundbar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. • If you want to connect your Soundbar with another Bluetooth device, press to disconnect the currently connection. • Depending on your Bluetooth device, different behaviors may appear. See your Bluetooth device's user manual for details. • The operational range between the SoundBar and a Bluetooth device is approximately 30 feet (10m). Factory default 1) To reset the Soundbar to the factory default settings, press Soundbar will be shut down and go into Standby mode. 5 times within 3 seconds. After completion of reset, the EN - 13 -