Sanyo HT32546 User Manual - Page 2

4th CHOOSE THE BEST CONNECTION FOR YOUR ANALOG EQUIPMENT GOOD AND BETTER RESOLUTION THE SIGNAL MAKES THE DIFFERENCE The standard analog AV and S-Video composite connectors are included on your new DTV to provide continued compatibility with older analog devices, such as a VCR. The S-Video connector will provide the best resolution. If you have an S-Video connector on your old analog equipment, you should use it instead of the standard video connector. 1 Connect your external equipment as shown here, matching connector colors to jack colors. (Cables are not supplied.) 2 Use the INPUT key on the remote control to select Video 2 to watch video from equipment connected to the VIDEO2 Composite jacks. NOTES:Composite and Component VIDEO2 inputs share the same audio inputs, therefore, you can connect only one device at a time to the VIDEO2 inputs. Connect other analog device to the Front AV jacks (VIDEO1). Refer to the owner's manual for instructions. Analog Device IN R-AUDIO-L VIDEO OUT R-AUDIO-L VIDEO S-VIDEO OUT RF CHANNEL 34 IN FROM ANT. VHF/UHF TO TV OUT S-Video Audio/Video INPUT 1 POWER 23 45 6 Remote Control INPUT key UHF VHF CATV AUDIO OUTPUT (MONO) L VIDEO2 S-VIDEO (MONO) R L VIDEO DIGITAL AUDIO OUTPUT R PR PB Y DIGITAL ANTENNA IN DTV Back 5th ADDING NEW DIGITAL CHANNELS TO THE DIGITAL CHANNEL DATABASE DTV ADD-ON SEARCH Use this feature to add digital channels to the digital channel database of active channels. If necessary, after the initial All Channel Search, turn the antenna then use the Setup Menu to perform a DTV Add-on Search. Repeat these steps, as necessary, for each transmitting tower (channel) in your area. Log on to www.antennaweb.org for a list of those channels. A DTV Add-on Search will take a few minutes to complete. NOTE: DTV Add-on Search will not affect channels already in the digital channel database. It will only add new channels that may be found. 1 Press the TUNER key to select the Digital Tuner. The channel display will begin with the letter "D," such as, D03-1. 2 Press the MENU key. keys Picture/Sound All CH Search DTV Cable Search DTV Add-on Search No CH Scan Memory Menu Language V-Guide Digital Captions Press ENTER key to Start Press MENU or Exit key to exit keys Yes 3 Use the CURSOR LM keys to highlight DTV Add-on Search. 4 Press the CURSOR > key so the red arrow (©) points toward Yes. 5 Press ENTER. 2 MENU key 78 INFO 0 RECALL TUNER 9 SLEEP MUTE MENU ENTER > M 3 CURSOR LM keys > CAPTION M EXIT Remote Control 1 TUNER key 5 ENTER key 4 CURSOR > key 6th IDENTIFYING PICTURES SHAPES AND PIX SHAPE KEY OPERATION The aspect ratio (ratio of the width to the height) of the broadcast image and the aspect ratio of the original program material all affect picture shape. Identifying Picture Shapes Letterbox-This describes a wide screen image displayed on a 4:3 aspect ratio screen. Postage Stamp-This describes an image that has a black border surrounding the picture (images fail to fill screen both vertically and horizontally). This can occur when the broadcaster upconverts 4:3 programming to wide screen format (16:9). Use the PIX SHAPE key to adjust the image to suit your personal preference. Available shapes may vary by broadcast and input mode. Available options are Pix1, Pix2, and Pix3. NOTE: The shapes available to you depend on the aspect ratio of the broadcast signal and the input mode. They may differ in appearance from those represented here. Postage Stamp Zoom CAPTION EXIT Simulated TV Images CH VOL PIX SHAPE AUDIO RESET PIX SHAPE key Remote Control