Sanyo MCDZX500 Instruction Manual - Page 4

REMOTE CONTROL (MCD-ZX550F only) Controls 1. Memory button (MEMORY) 3 2. Skip/Search buttons (SKIP/SEARCH) 4 3. Play/Pause button (PLAY/PAUSE) 2 4. Stop button (STOP) 5. Repeat button (REPEAT) 1 5 6. Battery compartment lid (back of the unit) Remote control range 6 Installing batteries Install two "R03/HP16" batteries (not supplied) as shown below. Remote sensor eri 15° 15° 7m max. The buttons on the remote control perform similar functions to similarly marked buttons on the front panel. POWER SUPPLY AC POWER Connect one end of the mains lead to the AC INPUT socket and the other end to an AC outlet. Note: • The installed batteries are automatically dis- connected when the mains lead is connected to the unit. • The FUNCTION switch is mounted on the secondary side. The unit is not disconnected from mains, even switched off. BATTERY POWER Installing batteries Install eight "R20/HP2" batteries (not supplied) as shown below. 3 Caution on batteries To prevent battery electrolyte leakage, which may result in injury and damage to the unit or other objects, observe the following precautions: 1. All batteries must be installed with the proper polarity (see diagram on the rear of the unit). 2. Do not mix new with old or used batteries. 3. Only use batteries of the same type and brand. 4. Remove the batteries when they are not to be used for a long period time. 5. When the batteries have become discharged, they must be disposed of in a safe manner which complies with all applicable laws.