Sanyo PDG-DWL2500 RS232C Basic - Page 21

PDG-DWL2500 Basic Serial Command Specifications 7. Status Read Command 7.1. Format 7.1.1. PC issues commands in format as below; "CR" Command [CR] Command 1 character(See Basic Status Read Command Table) 7.1.2. When a projector receives the appropriate command, it returns a character line as the required data. Required Data [CR] Required Data A character line(See Basic Status Read Command Table) 7.1.3. When the received data cannot be decoded, the projector returns "?" [CR]. 7.2.Transfer Example Get input mode for projector with basic commands PC → Projector Projector → PC Command (issues a command of getting current input mode) "C" "R" "1" "CR" "1" "CR" Processing Response (A few ms 1s) (Shows Computer 1 is selected) 7.3.Operation Requirements Status read Commands are invalid when Eco mode is selected in Standby mode of Setting menu and projector is in standby. 21/25