Sanyo PDG-DXL2000 RS232C Basic - Page 19

PDG-DXL2000 Basic Serial Command Specifications Unacceptable " "[CR] 6.51. Computer 1 Analog RGB Command Command "C50" [CR] Detail Select Analog RGB in Computer 1 input. Although projector returns "OK", Input search is not executed with this command while Input search is set to On1/On2. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.52. Computer 1 RGB (SCART) Command Command "C51"[CR] Detail Select Scart input in Computer1. Although projector returns "OK", Input search is not executed with this command while Input search is set to On1/On2. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.53. Computer 1 Component Command Command "C54"[CR] Detail Select Component input in Computer1. Although projector returns "OK", Input search is not executed with this command while Input search is set to On1/On2. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.54. AUTO PC ADJ. Command Command "C89" [CR] Detail Execute Auto PC Adj. function. This command works the same as "AUTO PC ADJ." button of the remote control. Sending the command during Auto PC Adj. operation stops the operation. This is the same operation as "AUTO PC" button of the remote control. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.55. PRESENTATION TIMER Command Command "C8A" [CR] Detail Execute Presentation Timer. This command works the same as "P-TIMER" button of the remote control. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.56. KEYSTONE ↑Command Command "C8E" [CR] 19/25