Sanyo PLC-EF31NL Owners Manual - Page 41
Projector mode, Wireless Mouse mode
UPC - 086483047268
View all Sanyo PLC-EF31NL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
SETTING USB This Projector is equipped with USB port for interactive operation USB between a projector and computer. Set mode following steps below. Wireless Mouse mode Select " " when controlling a computer with Remote Control of this projector. Projector mode Select " " when controlling a projector with computer. NOTE: Before you control a projector by computer, install USB driver (optionally sold parts) and set up computer following instruction in USB driver package. Contact your authorized dealer. Press SELECT button at this icon to display previous items. Move a pointer to item and then press POINT LEFT/RIGHT button(s). Lamp counter reset Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting. 1 Turn projector on, press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SETTING Menu icon. 2 Press POINT DOWN button to move a red frame pointer to "Lamp counter reset" and then press SELECT button. 3 Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and then press SELECT button. Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button. NOTE: Be sure to reset correct lamp number otherwise LAMP REPLACE indicator continues lighting. 4 Another confirmation dialog box appears and select [Yes] to reset Lamp Replace Counter. Do not reset Lamp Replace Counter except after Projection lamp is replaced. 1 2 Move pointer to Lamp counter reset and then press SELECT button. Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and then press SELECT button. Quit Closes SETTING MENU. Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button. 41