Sanyo PLC-EF60A User Manual - Page 37
Input 3, Input 4/Input 5, Y, Pb/Cb, Pr/Cr, Video
View all Sanyo PLC-EF60A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Input Input 2 Move a pointer to Input 2 and press the SELECT button. RGB When the input source is analog coming from a computer through the Input 2 (5 BNC-type: Red, Green, Blue, H. Sync., and V. Sync.) terminal, select RGB. Video When video input signal is connected to the Input 2 (VIDEO) terminal , select Video. Y, Pb/Cb, Pr/Cr When the input source is component coming from video equipment connected to the Input 2 (Y, Pb/Cb, Pr/Cr) terminal, select Y, Pb/Cb, Pr/Cr. Source Select Menu Move the pointer to RGB, Video, or Y, Pb/Cb, Pr/Cr, and press the SELECT button. Input 3 Move a pointer to Input 3 and press the SELECT button. Video When video input signal is connected to the Input 3 (VIDEO) terminal, select Video. Y, Pb/Cb, Pr/Cr When the input source is component coming from video equipment connected to the Input 3 (Y, Pb/Cb, Pr/Cr) terminal, select Y, Pb/Cb, Pr/Cr. S-Video When video input signal is connected to the Input 3 (S-VIDEO) terminal, select S-Video. Source Select Menu Move the pointer to Video, Y, Pb/Cb, Pr/Cr, or S-Video and press the SELECT button. Input 4/Input 5 A source menu appears corresponding to the board module inserted into the Input 4 and Input 5 terminals. ✔Note: • Input 4 and Input 5 can not be selected when no interface board is inserted into the respective slots. (p.21) • Input 5 terminal can only accept digital signals. • Adjusted values or selected settings in Input 4 and Input 5 return to factory default setting when the connected interface boards are removed from those terminal slots. Input 37