Sanyo PLC-EF60A User Manual - Page 67
Lamp Replace Indicators
View all Sanyo PLC-EF60A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Maintenance & Cleaning Maintenance and Cleaning Lamp Replace Indicators Indicators READY Green LAMP Red LAMP 1/2 REPLACE Orange Slow Slow Projector Condition The lamp cannot light up. (The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed.) The lamp cannot light up. (The lamp has been cooled down enough and the projector is in stand-by mode and ready to be turned on with the POWER ON-OFF button.) Fast Both Slow The lamp is not installed in the projector. The lamp of which indicator is lighting has been used overtime. Replace the lamp and then reset the Lamp time. The indicator will turn off. Either lamp cover is not replaced or fit in. Both of the indicators keeps blinking three times at regular intervals and the projector cannot be turned on. ✽ When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 57, 62, and 63. 67