Sanyo PLC-SU20N Owners Manual
Sanyo PLC-SU20N - SVGA LCD Projector Manual
 |
View all Sanyo PLC-SU20N manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-SU20N manual content summary:
- Sanyo PLC-SU20N | Owners Manual - Page 1
Multimedia Projector MODEL PLC-SU20N Owner's Manual - Sanyo PLC-SU20N | Owners Manual - Page 2
service requests were not caused by problems with our projectors. They were caused by problems that could have been prevented, if the owner had followed the instructions in the manual. You can often correct operating problems yourself. If your projector fails to work properly, see "TROUBLESHOOTING - Sanyo PLC-SU20N | Owners Manual - Page 3
projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts all warnings and instructions marked on the projectors. For added protection to the projector during a lightning - Sanyo PLC-SU20N | Owners Manual - Page 4
THE PROJECTION LENS 33 33 ZOOM ADJUSTMENT 20 LAMP REPLACEMENT 34 FOCUS ADJUSTMENT 20 LAMP REPLACEMENT MONITOR TIMER 34 KEY STONE ADJUSTMENT NO SHOW FUNCTION 20 21 TROUBLESHOOTING 35 PICTURE FREEZE FUNCTION 21 TECHNICAL SPECIFICATIONS 37 SOUND ADJUSTMENT 21 SOUND VOLUME ADJUSTMENT - Sanyo PLC-SU20N | Owners Manual - Page 5
, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. x Compatibility This projector is compatible with many different types of personal computers and video devices, including; q IBM-compatible - Sanyo PLC-SU20N | Owners Manual - Page 6
projector, following attention should be taken. q Do not put a flammable object near this vent. q Keep heat-sensitive objects away from the exhaust vent. q Do not touch this area especially screws and metallic parts . This area will become hot while the projector is used. - Sanyo PLC-SU20N | Owners Manual - Page 7
on a flat projection surface. q The projector can be focused from 4.6'(1.4m) ~ Lift the front of the projector and pull the FEET LOCK LATCHES on both sides of the projector. 2 Release the FEET LOCK the ADJUSTABLE FEET, lift the front of the projector and pull and undo the FEET LOCK LATCHES. The position - Sanyo PLC-SU20N | Owners Manual - Page 8
plug into any other type of power system. Consult your authorized dealer or service station if your are not sure of the type of power supply being in use. Connect the projector with the peripheral equipment before turning the projector on. (Refer to pages 10 ~ 13 for connection.) CAUTION For safety - Sanyo PLC-SU20N | Owners Manual - Page 9
carrying case recommended by Sanyo. q Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, use a case recommended by Sanyo. q For carrying or - Sanyo PLC-SU20N | Owners Manual - Page 10
CONNECTING THE PROJECTOR TERMINALS OF THE PROJECTOR S-VIDEO INPUT JACK Connect the S-VIDEO output from the video equipment to this terminal. (Refer to P11.) AUDIO INPUT JACKS Connect the audio outputs from the video equipment to these terminals. (Refer to P11.) q When the audio output is monaural, - Sanyo PLC-SU20N | Owners Manual - Page 11
not supplied with this projector. Video / Audio Output S-VIDEO Output Video Audio Cable ✽ S-VIDEO Cable ✽ Use either the VIDEO jack or S-VIDEO jack. When the both jacks are connected, the S-VIDEO jack has priority over the VIDEO jack. S-VIDEO Terminals of the Projector R-AUDIO-L(MONO) AUDIO - Sanyo PLC-SU20N | Owners Manual - Page 12
FOR SERIAL PORT,or ADB PORT ✽ • MAC ADAPTER ✽ • MONITOR CABLE ✽ • PC AUDIO CABLE (stereo) ✽ ✽ These cables are not supplied with this projector. IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA) Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier To the - Sanyo PLC-SU20N | Owners Manual - Page 13
CONNECTING THE PROJECTOR S-VIDEO R-AUDIO-L(MONO) AUDIO VIDEO IN COMPUTER IN OUT MONITOR OUT CONTROL PORT the table below depend- ON ing on the RESOLUTION MODE that you want to use before your turn on the projector and computer. OFF ON DIP 123456 1 23 4 56 13" MODE (640 x 480) ON ON OFF - Sanyo PLC-SU20N | Owners Manual - Page 14
VIDEO BUTTON Used to select VIDEO source. (P29) COMPUTER BUTTON Used to select COMPUTER output source. (P22) MENU BUTTON Used to select MENU operation. (P17, 18) COMPUTER VIDEO ON-OFF ZOOM FOCUS VOLUME MUTE D.ZOOM MENU the projector on or off. (P19) POINT BUTTON Used to move the pointer on the MENU, - Sanyo PLC-SU20N | Owners Manual - Page 15
COMPUTER VIDEO ON-OFF ZOOM FOCUS VOLUME FOCUS BUTTON Used to adjust focus. (P20) MUTE D.ZOOM MENU MUTE (5m) and 60° front and rear of the projector 60° 16.4' (5 m) FREEZE BUTTON Used to precautions : q Use (2) AA type alkaline batteries. q Replace two batteries at the same time. q Do not use - Sanyo PLC-SU20N | Owners Manual - Page 16
. WARNING TEMP. INDICATOR This indicator flashes red when internal projector temperature is too high. (P33) LAMP READY WARNING TEMP. LAMP REPLACE LAMP REPLACE INDICATOR This indicator turns to yellow when the life of the projection lamp draws to an end. (P34) MENU BUTTON Used to open or close the - Sanyo PLC-SU20N | Owners Manual - Page 17
BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through the ON-SCREEN MENU. Refer to the following pages to operate each adjustment on the ON-SCREEN MENU. 1 MOVING THE POINTER Move the pointer (see the NOTE below) by pressing POINT - Sanyo PLC-SU20N | Owners Manual - Page 18
match with the input signal format. (Refer to P24, 25) SETTING MENU Used to set the Display Menu and to reset Lamp Replacement Monitor Timer. (Refer to P31) SYSTEM MENU Used to select a computer system. (Refer to P22) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White - Sanyo PLC-SU20N | Owners Manual - Page 19
ON-OFF button again to turn off the projector. The LAMP indicator lights bright and the READY indicator turns off. The Cooling Fans operate for to flash, call your authorized dealer or service station. NOTE: The Cooling Fan may work for cooling while the projector is turned off. When the Cooling Fan - Sanyo PLC-SU20N | Owners Manual - Page 20
button on the Remote Control Unit or select the Keystone on the SCREEN menu. (Refer to page 28, 29.) The message "Keystone" is displayed. UP button to reduce the upper part or the image, and press the KEYSTONE w button or the POINT DOWN button to reduce the lower part. Reduce the upper width with - Sanyo PLC-SU20N | Owners Manual - Page 21
BASIC OPERATION NO SHOW FUNCTION Press the NO SHOW button on the Remote Control Unit to black out the image. This function is cancelled when the NO SHOW button is pressed again or any other function button is pressed. No show The message disappears after 4 seconds. PICTURE FREEZE FUNCTION Press - Sanyo PLC-SU20N | Owners Manual - Page 22
the connection of the computer and the projector is set correctly. (Refer to TROUBLESHOOTING on page 35.) SYSTEM BOX Display the SYSTEM being selected. SELECT COMPUTER MODE MANUALLY To set the Computer system manually, select the mode on the ONSCREEN MENU. 1 Press the MENU button and the ON-SCREEN - Sanyo PLC-SU20N | Owners Manual - Page 23
COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H- 90 47.00 SVGA 9 800 x 600 38.60 60.31 MAC 19 1024 x 768 60.24 NOTE : Specifications are subject to change without notice. V-Freq. (Hz) 71.92 51.09 60.51 74.55 60.00 - Sanyo PLC-SU20N | Owners Manual - Page 24
those exceptional signal formats and the projector has five independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT RIGHT - Sanyo PLC-SU20N | Owners Manual - Page 25
has a dark bar(s), try this adjustment. Display area Adjustment of the area displayed with this projector. Select the resolution at the Display area dialog box, or adjust the number at the Quit Closes the PC ADJUST Menu. Press the SELECT button to select the typical resolution of the image. 25 - Sanyo PLC-SU20N | Owners Manual - Page 26
MANUALLY 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu IMAGE ADJUSTMENT Menu. NORMAL FUNCTION The normal picture level is preset on this projector at the - Sanyo PLC-SU20N | Owners Manual - Page 27
Go! Starts the Auto Image Adjustment. Quit Closes the AUTO IMAGE ADJUSTMENT Menu. NOTE : The Fine sync., Total dots, and Picture Position of some computers may not be fully adjusted with the Auto Image Function. In that case, manual adjustment is required to make fine image. (Refer to page 26 to - Sanyo PLC-SU20N | Owners Manual - Page 28
To adjust the image size or pan the image, select Digital zoom in the dialog box. The ON-SCREEN menu and SCREEN ADJUST menu disappears and the message "D. Zoom" is displayed. This projector is also enters Digital Zoom mode by pressing the D.ZOOM v/w button on the Remote Control Unit. Refer to the - Sanyo PLC-SU20N | Owners Manual - Page 29
adjusts itself to optimize its performance. When the Video System is PAL-M or PAL-N, select the system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce the proper video image, it is required to select a specific broadcast signal format among PAL, SECAM, NTSC - Sanyo PLC-SU20N | Owners Manual - Page 30
Recalls the data previously adjusted. Stored Stores the data in the memory. Quit Closes the PICTURE IMAGE ADJUSTMENT Menu. NORMAL FUNCTION The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control - Sanyo PLC-SU20N | Owners Manual - Page 31
menu. The picture will change into next one by sliding black image side ways like drawing the black curtains when the input source is turned into another one. Lamp age The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lamp replacement - Sanyo PLC-SU20N | Owners Manual - Page 32
for the wireless mouse operation. The wireless mouse is available only when PC mouse pointer is displayed on the screen. When the menu or the indicator of the projector is displayed on the screen instead of the PC mouse pointer, the wireless mouse cannot be used. INSTALLATION To use the Wireless - Sanyo PLC-SU20N | Owners Manual - Page 33
Replace the Air Filter. Make sure that the Air Filters are fully inserted. CAUTION Do not operate the projector with the Air Filter removed. Dust may become stuck on the LCD above symptoms are noticed, contact your authorized dealer or service station for the cleaning. CLEANING THE PROJECTION LENS - Sanyo PLC-SU20N | Owners Manual - Page 34
reset the LAMP REPLACEMENT MONITOR TIMER, when the lamp is not replaced. LAMP ASSEMBLY ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. information to the dealer. q Model No. of your projector : PLC-SU20N q Replacement Lamp Type No. : POA-LMP21J (Service Parts No. 610 - Sanyo PLC-SU20N | Owners Manual - Page 35
APPENDIX TROUBLESHOOTING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 13. 2. Check cable connection. Verify that - Sanyo PLC-SU20N | Owners Manual - Page 36
turn on the computer. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. Sanyo Service is easily obtained. If after following all operating instructions, you find that service is necessary, contact the SFS Corporation in Los Angeles, or the store where - Sanyo PLC-SU20N | Owners Manual - Page 37
SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System Scanning Frequency Projection Image size (Diagonal) Horizontal Resolution Projection Lens Throw Distance Projection Lamp 1 (Video, Audio R and L) and DIN 4 pin (S-Video) x - Sanyo PLC-SU20N | Owners Manual - Page 38
OPTIONAL PARTS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. q Control Cable for Serial Port Type No. : POA-MCSRL q Control Cable for ADB Port Type No. : POA-MCMAC q MAC Adapter Type No. : POA-MACAP 38 - Sanyo PLC-SU20N | Owners Manual - Page 39
SANYO INDUSTRIAL VIDEO LCD PROJECTOR LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
 |
 |
Owner's Manual
PLC-SU20N
Multimedia Projector
MODEL