Sanyo PLC-SU20N Owners Manual - Page 16
Top Control and Indicators, WARNING TEMP. INDICATOR - lamp replacement
View all Sanyo PLC-SU20N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
BEFORE OPERATION TOP CONTROLS AND INDICATORS POWER ON-OFF BUTTON Used to turn the projector on or off. (P19) LAMP INDICATOR This indicator is dim when the projector is turned on. And bright when the projector is in stand-by mode. READY INDICATOR This indicator is lit in green when the projector is ready to be turned on. WARNING TEMP. INDICATOR This indicator flashes red when internal projector temperature is too high. (P33) LAMP READY WARNING TEMP. LAMP REPLACE LAMP REPLACE INDICATOR This indicator turns to yellow when the life of the projection lamp draws to an end. (P34) MENU BUTTON Used to open or close the MENU operation. (P17, 18) ZOOM FOCUS VOLUME ON-OFF MENU MODE SELECT AUTO IMAGE NORMAL ZOOM BUTTONS Used to select zoom adjust. (P20) FOCUS BUTTONS Used to select focus adjust. (P20) VOLUME BUTTONS Used to adjust volume. (P21) MODE BUTTON Used to select input source either Computer or Video. (P22, 29) SELECT BUTTON Used to execute the item selected. It is also used to expand the image in DIGITAL ZOOM mode. (P28) POINT BUTTONS Used to select an item or adjust the value on the MENU. It is also used to pan the image in DIGITAL ZOOM mode. (P28) NORMAL BUTTON Used to reset to normal picture adjustment preset by factory. (P26, 30) AUTO IMAGE BUTTON Used to operate AUTO IMAGE function. (P27) 16