Sanyo PLC-SU20N Owners Manual - Page 31

SETTING SETTING MENU 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press the SELECT button to set it "On" or "Off". Blue back When this function is in the "On" position, this projector will produce a blue image instead of the video noise on the screen when the input source is unplugged or turned off. Display When this function is in the "On" position, the On- Screen Displays always appear when adjustments are made. (The following displays disappear by switching this function "Off.") q Preparation Display (The Number-counting-down Display) q Mode Display q Volume/Mute Display q Zoom Display q Focus Display q Normal Display q No show Display q Keystone Display q D.Zoom Display Ceiling When this function is in the "On" position, the top / bottom and the left / right reversed picture is provided to project the image from a ceiling mounted projector. Rear When this function is in the "On" position, the left / right reversed picture is provided to project the image to a rear projection screen. Split wipe Turn this function "On" position in the SETTING menu. The picture will change into next one by sliding black image side ways like drawing the black curtains when the input source is turned into another one. Lamp age The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset the lamp replacement monitor timer by using this function. (Refer to page 34.) Set the Pointer to the item, and then press the SELECT button. Ceiling function Rear function SELECTING LANGUAGE The language used in the ON-SCREEN MENU is selectable from among English, German, French, Italian, Spanish and Japanese. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select LANGUAGE and press the SELECT button. Another dialog box LANGUAGE Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the language that you want to set, and then press the SELECT button. Move the Pointer to the language that you want to set, and then press the SELECT button. 31