Sanyo PLC-WL2503 Owners Manual - Page 13
Installation, Positioning the Projector, Adjustable Feet
UPC - 086483079627
View all Sanyo PLC-WL2503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. The projector will focus at distance from 2.09' to 3.93' (63.6 cm to 119.7 cm). Note: • This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. 3.93' (119.7 cm) (Inch Diagonal) 2.83' (86.1 cm) ā 2.09' (63.6 cm) ā ā Screen Size (W x H) mm 16:10aspect ratio 60" 1292 x 808 80" 1723 x 1077 110" 2369 x 1481 Throw distance 2.09' (63.6 cm) 2.83' (86.1 cm) 3.93' (119.7 cm) A 7.9" (20.0 cm) 9.7" (24.5 cm) 12.3" (31.3 cm) Adjustable Feet Projection angle can be adjusted up to 10.0 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise. To correct keystone distortion, press the KEYSTONE button on the remote control or on the top control or select Keystone from the menu (see pages 23, 46). Adjustable Feet $ 13