Sanyo PLC-XC55 Owner's Manual - Page 51
On start, Lamp control, Closed Caption, System Selection. P.39
View all Sanyo PLC-XC55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
On start When this function is "On", the projector is automatically turned on just by connecting the AC power cord to a wall outlet. On start Note: Be sure to turn the projector off properly (see "Turning Off the Projector" on page 19). If the projector is turned off in the incorrect sequence, the On start function does not operate properly. Closed Caption Closed Caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ◄► buttons to select CC1, CC2, CC3 or CC4. If the closed caption is not clear, you can change the text from Color to White. Notes: The Closed Caption is available only under the situation below. • When the input signal is NTSC of composite and S-video, and the system is set according to the signal or set on "Auto". • The system must be set on NTSC or Auto in Video System Selection. (P.39) • The icon of Closed Caption is displayed in gray while it is not available. • The closed caption is unavailable when On-Screen menu and P-Timer are displayed. Lamp control This function allows you to change brightness of the screen. Normal . . . . . normal brightness Auto brightness according with the input signal Eco lower brightness reduces the lamp power consumption and extends the lamp life. Note: Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized. Closed Caption Setting 51