Sanyo PLC-XD2200 Owner's Manual - Page 26

Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as User in the Logo selection (p.47), the screen changes each time you press the NO SHOW button as follows. black out→ captured image → normal ✔Note: When use the MUTE button to release the No Show function, the mute function can not be operated at the same time. P-TIMER button Press the P-TIMER button on the remote control to operate the Count up/Count down function. Refer to p.51 for detail of Setting for the P-timer function. To stop the count time, press the P-TIMER button. To cancel the P-timer function, press and hold the P-TIMER button. IMAGE button Press the IMAGE button on the remote control to select a desired image mode of the screen. See pages 32, 39 for details. SCREEN button Select the screen size (See pages 34-35, 42 for details). No show disappears after 4 seconds. P-Timer display 0 SCREEN button P-TIMER button NO SHOW button IMAGE button ✔Note: See the previous page for the description of other buttons. 26