Sanyo PLC-XM100 Network Setup - Page 40
Setting 1, Ceiling, Power, management, On start, Lamp control, Lamp life, control, Remote control
View all Sanyo PLC-XM100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Chapter 4 Controlling the Projector Setting 1 Item Description Input button.......Sets the input search mode by pressing the INPUT button of the projector and the remote control. (Mode1, Mode2, Mode3) Background.........Sets the screen background when no signal input. (Blue, User, Black) Display Switches on or off the on-screen menu display on the screen. (OFF, Countdown off, ON) Countdown off........Displays input image instead the countdown during the startup. Logo Sets on or off the logo display on the screen during the startup. (OFF, Default, User) Setting 2 Item Description Ceiling Sets the image top/bottom and left/ right reversed. (ON, OFF) Rear Sets the image left/right reversed. (ON, OFF) Power management......Sets into the selected power management mode (OFF, Ready, Shutdown) if the input signal is interrupted and no control key is pressed for the specified period of time. *The specified time can be set 1 to 30 min. On start Sets the power-on mode when the AC cord is connected to the outlet. Lamp control......Selects lamp control mode. (Auto, Normal, Eco1, Eco2) Lamp life control Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds the recommended total hours of use. Remote control....Selects the remote control code. (Code1 - Code8) Fan speed control Sets the running speed for the cooling fans. (Normal, Max) 40