Sanyo PLC-XM100 Network Setup - Page 41
Setting 3, Description - filter
View all Sanyo PLC-XM100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setting up the projector Setting 3 Item Description Filter counter(h Displays the filter counter. Reset the time after filter cartridge replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. * Do not reset the Filter counter when the filter cartridge is not replaced. Scrolls remaining Displays the scrolls remaining of the filter. Reset the scroll counter after filter cartridge replacement. Click "Reset", a confirmation display appears, and then click "OK", the time will be reset. * Do not reset the Scrolls remaining when the filter cartridge is not replaced. Filter control........Scroll the filter. Click "Roll-up", a confirmation display appears, and then click "OK", the filter will be scrolled. Filter warning.....Sets the time to indicate the filter warning message on the screen. (OFF, 400H, 700H, 1000H) PJ lock suspend When the projector has a security of PIN code lock, disable this function temporarily by pressing Execute button. Setting procedure 1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again. 2. Access this page with the web browser. 3. Click Execute button on the PJ lock suspend. * This function is disabled after the projector turns on. Shutter Sets the shutter operation. (ON: close, OFF: open) Shutter management......Sets the specified period of time when the projector shuts down after the projector is left with the shutter closed. * The specified time can be set 5 to 180 min. Freeze Sets the image to freeze mode. (ON, OFF) Factory default..........Sets all of the projector control items to the factory default setting except the following items. Lamp Corres. Value, PJ time, Network PIN code, Network setting * This function is not effective for the settings of Network address settings, e-mail settings, etc. ENGLISH 41