Sanyo PLC XT35L Owners Manual - Page 31

Basic Operation NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. "No show" disappears after 4 seconds. P-TIMER button Press the P-TIMER button on the remote control. The P-Timer display "00:00" appears on the screen and the countdown starts (00:00-59:59). To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again. KEYSTONE button Press the KEYSTONE button on the remote control. The "Keystone" appears on the screen. Use the Point ed buttons to correct keystone distortion. The keystone adjustment can be stored (see page 45). Reduce the upper width with the Point e button. Reduce the lower width with the Point d button. P-Timer display Remote Control P-TIMER button KEYSTONE button NO SHOW button ✔Note: • See the previous page for the description of other buttons. • The white arrows indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the maximum correction. • If you press the KEYSTONE button on the remote control once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled. 31