Sanyo PLC-XU30 Owners Manual - Page 9

PREPARATION POSITIONING PROJECTOR q This projector is designed to project on a flat projection surface. q The projector can be focused from 5.3'(1.6m) ~ 40.0'(12.2m). q Refer to the figure below to adjust a screen size. ROOM LIGHT The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image. 5.3' (1.6m) 40" 26.6' (8.1m) 20.0' (6.1m) 13.1' (4.0m) 150" 100" 77" 115" 200" 153" 40.0' (12.2m) 300" Max. Zoom 230" Min. Zoom H1 31" H2 Screen Size (W x H) mm Height (H1) Height (H2) 31" 40" 629.9 x 472.4 812.8 x 609.6 16.7"(425.16mm) 21.6"(548.64mm) 1.9"(47.24mm) 2.4"(60.96mm) 100" 2032 x 1524 54"(1371.6mm) 6"(152.4mm) 150" 3048 x 2286 81"(2057.4mm) 9"(228.6mm) 200" 300" 4064 x 3048 6096 x 4572 108"(2743.2mm) 162"(4114.8mm) 12"(304.8mm) 18"(457.2mm) ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 15.6 degrees. 1 Lift the front of a projector and pull FEET LOCK LATCHES on the both sides of a projector. 2 Release FEET LOCK LATCHES to lock ADJUSTABLE FEET and rotate ADJUSTABLE FEET to fine tune position and tilt. 3 To retract ADJUSTABLE FEET, lift the front of a projector and pull and undo FEET LOCK LATCHES. Keystone distortion of a projected image can be adjusted by Menu Operation. (Refer to P20 and 35.) CAUTION Avoid positioning a projector with the angle of more than 20 degrees. Projection Lamp may malfunction. ADJUSTABLE FEET FEET LOCK LATCHES 9