Sanyo PLC XU35 Owners Manual - Page 20
Adjusting Screen
![]() |
View all Sanyo PLC XU35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
BASIC OPERATION ADJUSTING SCREEN ZOOM ADJUSTMENT 1 Press ZOOM button on Top Control or ZOOM v/w button on Remote Control Unit. The message "Zoom" is displayed. 2 Press ZOOM v button or POINT UP button to make image larger, and press ZOOM w button or POINT DOWN button to make image smaller. Zoom Message disappears after 4 seconds. FOCUS ADJUSTMENT 1 Press FOCUS button on Top Control or FOCUS v/w button on Remote Control Unit. The message "Focus" is displayed. 2 Adjust focus of image by pressing FOCUS v/w button or POINT UP/DOWN button(s) . Focus Message disappears after 4 seconds. KEYSTONE ADJUSTMENT If a projected picture has keystone distortion, correct image with KEYSTONE adjustment. 1 Press KEYSTONE v/w button on Remote Control Unit or select Keystone on SETTING menu. (Refer to page 35.) Keystone dialog box appears. 2 Correct keystone distortion by pressing KEYSTONE v/w button or POINT UP/DOWN button(s). Press KEYSTONE v button or POINT UP button to reduce the upper part of image, and press KEYSTONE w button or POINT DOWN button to reduce the lower part. Reduce the upper width with KEY STONE v button or POINT UP button. Reduce the lower width with KEY STONE w button or POINT DOWN button. PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. 20
![](/manual_guide/products/sanyo-plc-xu35-owners-manual-31f9e07/20.png)