Sanyo PLC XU35 Owners Manual - Page 21

BASIC OPERATION NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, press NO SHOW button again or press any other button. No show Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control unit. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop P-TIMER display, press P-TIMER button. And then, press PTIMER button again to cancel P-TIMER function. SOUND ADJUSTMENT DIRECT OPERATION Indicates roughly level of volume. Volume Press VOLUME (+/-) button(s) on Top Control or on Remote Control Unit to adjust volume. Volume dialog box appears on the screen for a few seconds. (+) button to increase volume, and (-) button for decreasing. Mute Press MUTE button on Remote Control Unit to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume (+/-) button(s). Press MUTE button to set Mute function On or Off. The display disappears after 4 seconds. MENU OPERATION 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SOUND Menu icon. 2 Press POINT DOWN button to move a red frame pointer to the item that you want to select, and then press SELECT button. Volume To increase volume, press POINT RIGHT button, and press POINT LEFT button for decreasing. SOUND MENU SOUND Menu icon Indicates roughly level of volume. Close SOUND Menu. Mute Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box display is changed to "On" and sound is cut off. To restore sound to its previous level, press POINT LEFT/RIGHT button(s) again. 21