Sanyo PLC-ZM5000S Owners Manual - Page 81

Appendix The projector is detecting abnormal condition. POWER green LAMP red Indicators WARNING TEMP. red WARNING FILTER orange SHUTTER blue LAMP REPLACE orange Projector Condition   Fig.2 Filter replacement icon Fig.3 Fig.4 Filter cartridge replacement icon If the Filter counter reaches a time set in the timer  setting, a Filter replacement icon (Fig.2) will appear on the screen and the WARNING FILTER indicator on the top panel will light up. Replace the filter as soon as possible. If the filter is out of scroll and the projector reaches a time set in the timer setting, Fig. 3 will appear on the screen and the WARNING FILTER indicator will light up. Replace the filter cartridge as soon as possible. If the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig.4) will appear on the screen and the WARNING FILTER indicator will light up. Replace the filter cartridge as soon as possible. Note: Fig.2, Fig.3 and Fig.4 icon will not appear when the Display function is set to Off (p.52) or during "Freeze" (p.30). The filter cartridge is not installed in the projector. Check the filter compartment to see if the filter cartridge is installed in the projector. When the filter cartridge is installed and the indicators continue to light and blink, read the column below. ❖  The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard.    ❊  The shutter is out of control. The shutter is out of control. (The projector is in the ❖  ❊  cooling mode.) The shutter is out of control. (The projector is in the ❖  ❊  stand-by mode.) In that case, contact the service center immediately. 81