Sanyo SU30 Instruction Manual, PLC-SU30

Sanyo SU30 - PLC SVGA LCD Projector Manual

Get Sanyo SU30 - PLC SVGA LCD Projector PDF manuals and user guides View all Sanyo SU30 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo SU30 manual content summary:

  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 1
    Multimedia Projector MODEL PLC-SU30 Owner's Manual
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 2
    projector from the power outlet. READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 3
    , be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 4
    otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-SU30U, PLC-SU30E, PLC-SU30B : Sanyo : SANYO FISHER COMPANY : 21605 Plummer
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 5
    OPERATION OF REMOTE CONTROL 14 SETTING 35 LASER POINTER FUNCTION 14 REMOTE CONTROL BATTERIES INSTALLATION 15 TOP CONTROLS AND PROJECTOR 19 CLEANING PROJECTION LENS 38 ADJUSTING SCREEN ZOOM ADJUSTMENT FOCUS ADJUSTMENT 20 20 20 LAMP REPLACEMENT LAMP REPLACE COUNTER TROUBLESHOOTING
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 6
    matrix liquid crystal display (LCD) technology. x Compact Design This projector is extremely compact in size projector may result in distorted image being displayed in a trapezoid shape. Keystone Correction solves this problem to operate both projector and computer with Remote Control Unit only. x
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 7
    and metallic part. This area will become hot while a projector is used. This projector detects internal temperature and automatically controls operating power of Cooling Fans. LENS COVER BACK TOP CONTROLS AND INDICATORS INFRARED REMOTE RECEIVER POWER CORD CONNECTOR BOTTOM LAMP COVER ADJUSTABLE
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 8
    into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION For safety, unplug
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 9
    flat projection surface. q The projector can be focused from 5.3'(1. Lift the front of a projector and pull FEET LOCK LATCHES on the both sides of a projector. 2 Release FEET LOCK To retract ADJUSTABLE FEET, lift the front of a projector and pull and undo FEET LOCK LATCHES. Keystone distortion of
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 10
    cabinet, and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this bag. The projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put other things on the cabinet
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 11
    INPUT JACK Connect the audio output (stereo) from computer to this jack. (Refer to P13.) USB CONNECTOR (Series B) When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P13.) ✽ Do not press this button. This
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 12
    CONNECTING TO COMPUTER Cables used for connection (✽ = Cable or adapter is not supplied with this projector.) • VGA Cable (HDB 15 pin) • USB Cable ✽ • Control Cable for PS/2 Port • MAC Adapter (When connecting to Macintosh computer) ✽ • DVI-Digital Cable (for Single Link T.M.D.S.) ✽ • Audio
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 13
    IN VIDEO DIGITAL R - AUDIO IN - L (MONO) Y - Pb / Cb - Pr / Cr S - VIDEO AUDIO IN R - AUDIO OUT - L COMPUTER RESET MCI COMPUTER IN ANALOG USB CONTROL PORT AUDIO OUT AUDIO IN Terminals of the Projector Audio Cable (Stereo) ✽ NOTE : When connecting the cable, the power cords of both the
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 14
    operation. (P17, 18) MUTE D.ZOOM INPUT MENU ALL-OFF SWITCH When using Remote Control Unit, turn this switch to "ON." And turn it to "ALL OFF" NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER POWER ON-OFF BUTTON Used to turn projector on or off. (P19) INPUT BUTTON Used to select input source. (P22,
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 15
    Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is Replace the compartment lid. To insure safe operation, please observe the following precautions : q Use (2) AA, UM3 or R06 type alkaline batteries. q Replace
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 16
    BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P38) LAMP REPLACE INDICATOR Turns to yellow when the life of the projection lamp draws to
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 17
    HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. WIRELESS REMOTE CONTROL POINT BUTTON Used to move the Pointer UP
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 18
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC SYSTEM / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35, 36) INPUT MENU Used to select input source either
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 19
    PROJECTOR 1 Press POWER ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off projector. LAMP button to turn a projector off and disconnect AC Power 38.) 4. Turn a projector on again. If WARNING TEMP.
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 20
    w button or POINT DOWN button to reduce the lower part. Reduce the upper width with KEY STONE v button or POINT UP button. Reduce the lower width with KEY STONE w button or POINT DOWN button. PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 21
    to normal, press NO SHOW button again or press any other button. No show Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control unit. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop P-TIMER
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 22
    by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select projector is set correctly. (Refer to TROUBLESHOOTING on page 40.) PC SYSTEM MENU SYSTEM Menu icon Displays system being selected. SELECT COMPUTER SYSTEM MANUALLY This projector
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 23
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 100 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION VGA 1
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 24
    button on Remote Control Unit. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 25, 26.) q Auto PC
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 25
    reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 26
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button. Full screen Press POINT LEFT/RIGHT button(s) to
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 27
    Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P28). IMAGE button Standard
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 28
    0 to 63.) Gamma Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.) 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to the Image
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 29
    projected image can be also expanded by pressing D.ZOOM v button on Remote Control Unit. Digital Zoom - When Digital zoom - is selected, ON-SCREEN selected when "RGB" is selected on PC SYSTEM Menu (P22). q This projector cannot display any resolution higher than 1280 X 1024. If your computer's screen
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 30
    VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION Choose Video by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). INPUT button Video Computer MENU OPERATION 1
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 31
    Video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 32
    1, Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P34). IMAGE button
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 33
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. The
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 34
    icon Image Level Menu Move a red frame pointer to the image icon to be set and then press SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press MENU button and ON-SCREEN MENU will appear. Press
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 35
    . Correct keystone distortion by pressing POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 20. Blue back When this function is "On," this projector will produce a blue image instead of the video noise on the screen when any input source is unplugged or turned off. When pressing SELECT
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 36
    code (Code 1), operate both projector and Remote Control in the ways above again. NOTE : When batteries of Remote Control Unit are replaced or ALL- OFF switch is turned to "ALL-OFF," the remote transmit code automatically returns to the normal code (Code 1). Lamp counter reset This function is used
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 37
    Port of the projector with Control Cable for Serial Port (not supplied). OPERATING WIRELESS MOUSE When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, SELECT button, and RIGHT CLICK button on Wireless Remote Control Unit. POINT button Used to move PC mouse pointer
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 38
    Replace Air Filter properly. Make sure that Air Filter is fully inserted. CAUTION Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality. Do not put small parts authorized dealer or service station for proper cleaning
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 39
    No. of your projector : PLC-SU30 q Replacement Lamp Type No. : POA-LMP35 (Service Parts No. 610 293 2751) LAMP REPLACE COUNTER Be sure to reset Lamp Replace Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE Indicator stops lighting. 1 Turn projector on, press
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 40
    your computer. 5. If an image still does not appear, unplug a projector from your computer and check your computer monitor's display. The problem may be with your graphics controller rather than with a projector. (When you reconnect a projector, be sure to turn the computer and monitor off before
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 41
    WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain the difficulty
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 42
    Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Multi-media Projector 48.3 mm with motor zoom and focus Throw Distance Projection Lamp 5.3' ~ 40.0' (1.6 m ~ 12.2 m) 200 W Manual AC Power Cord Wireless Remote Control Transmitter and Batteries VGA Cable Control
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 43
    port (PS/2, Serial or ADB port) on your computer to this connector with Control Cable. (Control Cable for PS/2 port is supplied, and Control Cables for Serial port and ADB port are not supplied.) Pin Configuration 876 5 43 21 PS/2 Serial ADB 1 ----- R X D ----- 2 CLK ----- ADB 3 DATA
  • Sanyo SU30 | Instruction Manual, PLC-SU30 - Page 44
    Printed in Japan Part No. 610 293 1129 (1AA6P1P2805-- MT6A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Owner’s Manual
PLC-SU30
Multimedia Projector
MODEL