Sanyo SU30 Instruction Manual, PLC-SU30 - Page 16

BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P38) LAMP REPLACE INDICATOR Turns to yellow when the life of the projection lamp draws to an end. (P39) MENU BUTTON Used to open or close MENU operation. (P17, 18) INPUT BUTTON Used to select input source. (P22, 30) IMAGE BUTTON Used to select image level. (P27, 32) POWER ON-OFF BUTTON Used to turn the projector on or off. (P19) ON -- OFF READY INDICATOR Lights green when the projector is ready to be turned on. And it flashes green in Power Management mode. (P36) RLEAPMLPACE WATRENMIPN.G VOLUME - INPUT IMAGE MENU READY VOLUME + LAMP SELECT ZOOM FOCUS LAMP INDICATOR Becomes dim when the projector is turned on. And bright when the projector is in stand-by mode. FOCUS BUTTON Used to adjust focus. (P20) POINT (VOLUME + / - ) BUTTONS Used to select an item or adjust value in ON-SCREEN MENU. They are also used to pan the image in DIGITAL ZOOM +/- mode. (P29) POINT LEFT/RIGHT buttons are also used as VOLUME +/- buttons. SELECT BUTTON Used to execute the item selected. It is also used to expand / compress the image in DIGITAL ZOOM mode. (P29) ZOOM BUTTON Used to adjust zoom. (P20) 16