Sanyo SU40 Instruction Manual, PLC-SU40 - Page 26
Computer Input, Manual Pc Adjustment
UPC - 086483046438
View all Sanyo SU40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
COMPUTER INPUT MANUAL PC ADJUSTMENT This projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by MultiScan system of this projector. If this happens, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the PC ADJUST Menu icon. 2 Press the POINT DOWN button to move the red frame pointer to the item that you want to adjust and then press the SELECT button. An adjustment dialog box will appear. Press the POINT LEFT/RIGHT button to adjust value. Fine sync Adjusts an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.) PC ADJUST MENU PC ADJUST Menu icon Move the red frame pointer to the item and press the SELECT button. Total dots The number of total dots in one horizontal period. Press the POINT LEFT/RIGHT button(s) and adjust number to match your PC image. Shows status Selected Mode (Stored / Free) of the selected Mode. Horizontal Adjusts horizontal picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position. Vertical Adjusts vertical picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position. Current mode Press the SELECT button to show the information of computer selected. Press the POINT LEFT/RIGHT button to adjust the value. Press the SELECT button at this icon to adjust "Clamp," "Display area (H/V)" or set "Full screen." Clamp Adjusts clamp level. When the image has a dark bar(s), try this adjustment. Current mode Press the SELECT button at the Current mode icon to show the information of the computer connected. 26