Sanyo SU40 Instruction Manual, PLC-SU40 - Page 32
Selecting Video System
UPC - 086483046438
View all Sanyo SU40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
VIDEO INPUT SELECTING VIDEO SYSTEM 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon. 2 Press the POINT DOWN button to move the red arrow pointer to the system that you want to select and then press the SELECT button. VIDEO JACK OR S-VIDEO JACK Auto The projector automatically detects incoming Video system, and adjusts itself to optimize its performance. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM Menu icon This box indicates the system being selected. Move the pointer to the system and press the SELECT button. Y, Pb/Cb, Pr/Cr JACKS Auto The projector automatically detects incoming Video signal, and adjusts itself to optimize its performance. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. AV SYSTEM MENU (COMPONENT VIDEO) AV SYSTEM Menu icon This box indicates the system being selected. Move the pointer to the system and press the SELECT button. 32