Sanyo VPC C40 Owners Manual - Page 154
Shooting, monitor, Viewing, images, Problem, Cause, Action
![]() |
UPC - 086483059384
View all Sanyo VPC C40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Shooting LCD monitor Problem When zooming in or out, the zoom movement stops momentarily. There is noise in the captured image. No playback image appears. The image is too dark. Cause The optical zoom has moved to the maximum magnification position. The ISO sensitivity setting is too high. The main switch is not set to PLAY. The flash was blocked by a finger or other object. Viewing images The subject was too far away. The subject was lit from behind. There is not enough light. Action Not a malfunction. Release the zoom switch, and press it again. Set the ISO sensitivity to a lower setting. Reference page 35 66 Set the main switch to PLAY. 39 Hold the camera correctly, and make sure the 26 flash is not obstructed. Capture the image in the range of 155 operation of the flash. Use the forced flash mode. 56 Use the exposure correction 36 function. Use the spot light-measuring 65 mode. Adjust the ISO sensitivity 66 setting. English 148
![](/manual_guide/products/sanyo-vpc-c40-owners-manual-f9e7875/154.png)