Sanyo VPC CA6 Instruction Manual, VPC-CA6EX Software 7.6 - Page 24

Connect your camera to a computer 1 Start your computer, and use the supplied USB interface cable to connect your camera to the computer. h Connect the camera's USB/AV terminal to the computer's USB connector. h The USB Connection Screen appears on the camera's monitor. USB CONNECTION USB/AV terminal CARD READER PictBridge PC CAMERA CANCEL Supplied dedicated USB interface cable To the USB/AV terminal To USB connector on the computer on the camera 2 Select "PC CAMERA", and press the SET button. CAUTION Insert and pull out the cable carefully i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket. i Do not use excessive force when connecting and disconnecting cables. HINT If the [USB Video Device] icon does not appear in the [My Computer] window... i The device driver installation may not have been successful. Open the [Printer and Other Hardware] folder in [Control Panel], delete [USB Video Device] from [Scanners and Cameras], and reinstall the device driver. English 22