Sanyo VPC CG6 Owners Manual - Page 40

TURNING THE CAMERA ON AND OFF Turning on the camera 1 Open the monitor unit, and press the ON/OFF button for at least 1 second. h If you press the REC/PLAY button for at least 1 second, the camera turns on in the playback mode. h If you press the ON/OFF button once, the camera will switch to the power save mode. Monitor unit ON/OFF button Turning on the camera when the power save (sleep) function is active In order to preserve battery pack power, the power save (sleep) function will automatically turn off the camera after one minute of no use during shooting, or five minutes of no use during playback (factory-preset setting). i When the power save function is active, you can restore the power by any of the following methods: h Press the ON/OFF button. h Press the [ ]/[ ] button. h Open the monitor unit. h Press the SET button. i The camera will switch to the standby mode after the power save function has been active for about 1 hour, or when you close the monitor unit. i The power save mode will not be activated while you are recording. i The user can specify the time elapsed before the power save function is activated (page 137). i When the camera is connected to a computer or printer using the dedicated USB interface cable, the power save function is disabled, and the camera turns off after about 12 hours. English 26