Sanyo VPC-FH1 VPC-FH1 Owners Manual English - Page 110

RECORDING MENU 1 Still image setting For still images, you can select either the 4:3 or 16:9 horizontal to vertical aspect ratio. This menu is also used for shooting sequential shots. Sequential shots 1 Select R or c, and press the SET button. h The camera changes to the sequential shots mode. 2 Press the [ ] button. h Shooting begins. Shooting continues as long as the [ kept pressed. ] button is HINT What is the maximum number of images in a sequential shots sequence? R: 9 images (6 fps) c: 15 images (12 fps) i If you continue shooting even after the maximum number of images has been captured, recording does not stop. i If you continue shooting after the maximum number of images has been captured, subsequent captured images will overwrite the sequence already captured, beginning from the first image in the sequence. About the focus when shooting sequential shots i When sequential shots are captured, the autofocus operates when the [ ] button is pressed halfway, fixing the focus. Can the flash be used? i The flash does not operate when shooting sequential shots. Did the angle of view change? i When shooting sequential shots, the angle of view relative to that of still image shooting may change. i At the c setting, the images are captured with an enlarged angle of view in comparison to other recording modes. About the PHOTO NR (page 126) setting i During sequential shots shooting, the PHOTO NR setting automatically turns OFF. 89 English