Sanyo VPC-S880P Owners Manual - Page 39

Troubleshooting

Page 39 highlights

Troubleshooting Refer to the symptoms and solutions listed below before sending the camera for repairs. If the problem persists, contact your local reseller or service center. Symptom Cause Solutions / Corrective Actions The power does not The batteries are not loaded. Load the batteries correctly. come on. The batteries are exhausted. Replace with a new set of batteries. The batteries or Long period of continuous use camera feels warm. of the camera or the flash. Even if I press the shutter button, the camera does not shoot. The shutter button is not pressed all the way down. The internal memory or memory card does not have any free capacity. Press the shutter button all the way down. Insert a new memory card, or delete unwanted files. The flash is charging. Wait until the status LED stops blinking. The memory card is write-protected. Remove the write-protection. Although it is set to auto focus, it does not focus. The lens is dirty. The distance to the subject is smaller than the effective range. Wipe clean with a soft, dry cloth or lens paper. Get your subject within the effective focus range. Files cannot be deleted. The file is protected. The memory card is write-protected. Cancel protection. Remove the write-protection. Cannot download images. The free space on the hard disk in your computer may be insufficient. Check whether the hard disk has a space for running Windows, and if the drive for loading image files has a capacity at least that of the memory card inserted in the camera. No power supply. Replace with a new set of batteries. EN-38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

EN-38
Troubleshooting
Refer to the symptoms and solutions listed below before sending the camera for
repairs. If the problem persists, contact your local reseller or service center.
Symptom
Cause
Solutions / Corrective
Actions
The power does not
come on.
The batteries are not loaded.
Load the batteries correctly.
The batteries are exhausted.
Replace with a new set of
batteries.
The batteries or
camera feels warm.
Long period of continuous use
of the camera or the flash.
Even if I press the
shutter button, the
camera does not
shoot.
The shutter button is not
pressed all the way down.
Press the shutter button all the
way down.
The internal memory or
memory card does not have
any free capacity.
Insert a new memory card, or
delete unwanted files.
The flash is charging.
Wait until the status LED stops
blinking.
The memory card is
write-protected.
Remove the write-protection.
Although it is set to
auto focus, it does
not focus.
The lens is dirty.
Wipe clean with a soft, dry cloth
or lens paper.
The distance to the subject is
smaller than the effective range.
Get your subject within the
effective focus range.
Files cannot be
deleted.
The file is protected.
Cancel protection.
The memory card is
write-protected.
Remove the write-protection.
Cannot download
images.
The free space on the hard
disk in your computer may be
insufficient.
Check whether the hard disk has
a space for running Windows,
and if the drive for loading image
files has a capacity at least that
of the memory card inserted in
the camera.
No power supply.
Replace with a new set of
batteries.