Sanyo WTC500L Owner's Manual - Page 40
To clear the adjusted data, Display area H, Reset, Store, Mode free
UPC - 086483074257
View all Sanyo WTC500L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Computer Adjustment Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the stored data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button. Store To store the adjusted data, select Store and then press the SELECT button. Move the red arrow pointer to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button. Quit Exit the PC Adjust Menu. Move the red frame pointer to the desired item and press the SELECT button. This Mode has stored parameters. To clear the adjusted data Vacant Values of "Total dots," "Horizontal," "Vertical," "Display area H," and "Display area V." To store the adjusted data ✔Notes: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.37). • PC Adjust Menu cannot be selected when Input 1[RGB (PC digital)] is selected in the Input Menu (p.35). 40 Close this dialog box.