Sanyo WTC500L Owner's Manual - Page 58
Shutter, Protection, Management, HDMI setup, Prohibits the shutter operation from the remote control
UPC - 086483074257
View all Sanyo WTC500L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Setting Shutter Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters. Protection Prohibits the shutter operation from the remote control and the projector's top control. Remote control...Selecting "On" prohibits the shutter operation from the remote control. Projector Selecting "On" prohibits the shutter operation from the top control. It is possible to prohibit the shutter operation from both of the remote control and the top control. Management The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 minutes. When the count-down time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down. The SHUTTER indicator is blinking blue during this cooling-off period. When the lamp has been fully cooled down, the READY indicator turns green lighting and the SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the SHUTTER indicator turns off. HDMI setup Set Image and Sound according to the output signal of video equipment. Press the Point 7 8 buttons to switch between each option. Image . . . . Normal : When the output of video equipment is set to "Normal." Enhanced : When the output of video equipment is set to "ENHANCED." Sound . . . HDMI : Select when use PCM AUDIO (DIGITAL AUDIO) AUDIO1: Select when use AUDIO1 input The names for the output setting of video equipment vary from equipment to equipment. For details, refer to the owner's manual of video equipment. When the black part of the image are destroyed or stand out, please switch to "Normal" or "Enhanced" according to the output signal of video equipment. ✔Note: •The Factory default value is set to 180 minutes for the count down time. •T he Shutter Management function cannot be halted. HDMI setup Press the Point 7 8 buttons to select Normal or Enhanced according to the output signal of video equipment and HDMI or Audio1 according to the input sound. ✔Note: • HDMI setup is not grayout and inoperative other than HDMI input selection mode. 58