Schwinn 430 Elliptical 2013 model Assembly and Owner's Manual - Page 43
the workout continues
View all Schwinn 430 Elliptical 2013 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Condition/Problem Things to Check Solution Drive train click/tick noise once per full crank revolution Check crank/pulley assembly Disconnect left and right foot assemblies and rotate crank. If sound persists, replace crank/pulley assembly. If sound does not come from rotating crank, check foot assemblies and upper/ lower handlebars. Check foot assemblies, leg Manually move foot, leg, and handlebar assemblies to isolate assemblies, handlebar sound. Replace part making sound. assemblies Squeaking noise that ap- Bolt that connects the Loosen pivot rod bolt slightly until noise goes away. See video pears a few minutes into swing arms to the axle run- for demonstration. White lithium grease can also be applied for a a workout and normally will ning through the console temporary fix. Contact Customer Care for assistance. get progressively worse as mast the workout continues 43