Schwinn 570 Treadmill Assembly and Owner's Manual - Page 51

Troubleshooting

Page 51 highlights

Troubleshooting Condition/Problem No display/partial display/ unit will not turn on Unit operates but Contact HR not displayed Unit operates but Telemetric HR not displayed Speed display is not accurate Things to Check Solution Check electrical (wall) outlet Make sure unit is plugged into a functioning wall outlet. Test the outlet with a known functioning device such as a lamp. Check connection at front Connection should be secure and undamaged. Replace power of unit cord or connection at unit if either are damaged. Check data cable integrity All wires in cable should be intact. If any are visibly crimped or cut, replace cable. Check data cable connections/orientation Be sure cable is connected securely and oriented properly. Small latch on connector should line up and snap into place. Check console display for Check for visual sign that console display is cracked or otherwise damage damaged. Replace Console if damaged. Console Display If Console only has partial display and all connections are fine, replace the Console. If the above steps do not resolve the problem, contact your local distributor for further assistance. Sensor grip Be sure hands are centered on HR sensors. Hands must be kept still with relatively equal pressure applied to each side. Dry or calloused hands Sensors may have difficulty with dried out or calloused hands. A conductive electrode cream (heart rate cream) can help make better conduct. These are available on the web or at medical or some larger fitness stores. If tests reveal no other issues, contact your local distributor for further assistance. Chest Strap Strap should be "POLAR®" compatible and uncoded. Make sure strap is directly against skin and contact area is wet. Make sure the transmitter has the curve oriented upward. Check User Profile Select the Edit User Profile option for the User Profile. Go to the WIRELESS HR setting and make sure that the current value is set to ON. Interference Try moving unit away from sources of interference (TV, Microwave, etc). Replace Chest Strap If interference is eliminated and HR does not function, replace strap. Replace Console If HR still does not function, contact your local distributor for further assistance. Display set to wrong unit of Change display to show correct units. measure. (English/Metric) 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

51
Condition/Problem
Things to Check
Solution
No display/partial display/
unit will not turn on
Check electrical (wall)
outlet
Make sure unit is plugged into a functioning wall outlet. Test the
outlet with a known functioning device such as a lamp.
Check connection at front
of unit
Connection should be secure and undamaged. Replace power
cord or connection at unit if either are damaged.
Check data cable integrity
All wires in cable should be intact. If any are visibly crimped or
cut, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly. Small
latch on connector should line up and snap into place.
Check console display for
damage
Check for visual sign that console display is cracked or otherwise
damaged. Replace Console if damaged.
Console Display
If Console only has partial display and all connections are fine,
replace the Console.
If the above steps do not resolve the problem, contact your local
distributor for further assistance.
Unit operates but Contact
HR not displayed
Sensor grip
Be sure hands are centered on HR sensors. Hands must be kept
still with relatively equal pressure applied to each side.
Dry or calloused hands
Sensors may have difficulty with dried out or calloused hands.
A conductive electrode cream (heart rate cream) can help make
better conduct. These are available on the web or at medical or
some larger fitness stores.
If tests reveal no other issues, contact your local distributor for
further assistance.
Unit operates but Telemet
-
ric HR not displayed
Chest Strap
Strap should be “POLAR
®
” compatible and uncoded. Make sure
strap is directly against skin and contact area is wet. Make sure
the transmitter has the curve oriented upward.
Check User Profile
Select the Edit User Profile option for the User Profile. Go to the
WIRELESS HR setting and make sure that the current value is
set to ON.
Interference
Try moving unit away from sources of interference (TV, Micro
-
wave, etc).
Replace Chest Strap
If interference is eliminated and HR does not function, replace
strap.
Replace Console
If HR still does not function, contact your local distributor for
further assistance.
Speed display is not ac
-
curate
Display set to wrong unit of
measure. (English/Metric)
Change display to show correct units.
TROUBLESHOOTING