Schwinn 570T Treadmill Assembly and Owner s Manual - Page 46

Maintenance

Get Schwinn 570T Treadmill PDF manuals and user guides View all Schwinn 570T Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

MAINTENANCE Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do the necessary tasks. Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that regular maintenance is done. Worn or damaged components must be repaired or replaced immediately. Only manufacturer supplied components can be used to maintain and repair the equipment. If at any time the Warning labels become loose, unreadable or dislodged, contact your local distributor for replacement labels. To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power cord in a secure location. Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition. Repair or replace all parts at the first sign of wear or damage, except for the Walking Deck. The Walking Deck is designed for wear on both sides of it. If only one side of the Walking Deck is worn, a replacement Deck is not required. It is recommended that a qualified service technician is used to flip the Walking Deck. After each workout, use a damp cloth to wipe your machine and Console free of moisture. With the Walking Deck lowered, if an edge of the Walking Belt can be seen, adjust it until the edge is not viewable. Note: Avoid excessive moisture on the Console. Weekly: Check for smooth roller operation. Wipe the machine to remove dust, dirt, or grime. Do not remove the Motor Control Board (MCB) Cover. Dangerous voltages and moving parts are present. The components are serviceable only by approved service personnel or by following service procedures supplied by Nautilus, Inc. Note: Do not use petroleum based products. Monthly or after 20 hours: Make sure all bolts and screws are tight. Tighten as necessary. Quarterly: Or after 25 hours - Lubricate the walking belt with 100% silicone lubricant. Silicone lubricant is not intended for human consumption. Keep out of reach of children. Store in a safe place. NOTICE: D o not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free of moisture. Cleaning To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before cleaning, maintaining or repairing this machine. Wipe the treadmill down after each use to keep the treadmill clean and dry. It may be necessary to use a mild detergent at times to remove all dirt and salt from the belt, painted parts and the display. NOTICE: T o prevent damage to the finish of the machine or Console, do not clean with a petroleum based solvent. Do not apply too much moisture to the Console. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
46
MAINTENANCE
Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is required to do
the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that
regular maintenance is done. Worn or damaged components must be repaired or replaced immediately.
Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact your local distributor for
replacement labels.
To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the
power cord from the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the
machine. Place the power cord in a secure location.
Daily:
Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not
use if found in this condition. Repair or replace all parts at the first sign of wear or damage, except
for the Walking Deck. The Walking Deck is designed for wear on both sides of it. If only one side of
the Walking Deck is worn, a replacement Deck is not required. It is recommended that a qualified
service technician is used to flip the Walking Deck. After each workout, use a damp cloth to wipe
your machine and Console free of moisture.
With the Walking Deck lowered, if an edge of the Walking Belt can be seen, adjust it
until the edge is not viewable.
Note:
Avoid excessive moisture on the Console.
Weekly:
Check for smooth roller operation. Wipe the machine to remove dust, dirt, or grime.
Do not remove the Motor Control Board (MCB) Cover. Dangerous voltages and moving
parts are present. The components are serviceable only by approved service personnel
or by following service procedures supplied by Nautilus, Inc.
Note:
Do not use petroleum based products.
Monthly
or after 20 hours:
Make sure all bolts and screws are tight. Tighten as necessary.
Quarterly:
Or after 25 hours - Lubricate the walking belt with 100% silicone lubricant.
Silicone lubricant is not intended for human consumption. Keep out of reach of
children. Store in a safe place.
NOTICE:
Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console free
of moisture.
Cleaning
To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before
cleaning, maintaining or repairing this machine.
Wipe the treadmill down after each use to keep the treadmill clean and dry. It may be necessary to use a mild detergent at
times to remove all dirt and salt from the belt, painted parts and the display.
NOTICE:
To prevent damage to the finish of the machine or Console, do not clean with a petroleum based solvent.
Do not apply too much moisture to the Console.