Schwinn 570T Treadmill Assembly and Owner s Manual - Page 49

Heart Rate Chest Strap Battery Replacement

Get Schwinn 570T Treadmill PDF manuals and user guides View all Schwinn 570T Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

performance. We can recommend that you use the following: • 8300 Silicone Spray, available at most Hardware and Auto Parts stores. • Lube-N-Walk® Treadmill Lubrication Kit, available from your local specialty fitness dealer or Nautilus, Inc. Store silicone lubricant in a safe place. Keep out of reach of children. Silicone lubricant is not intended for human consumption. 6. Manually rotate the belt 1/2 of the length of the belt and apply lubricant again. 7. Unfold the machine. Refer to the "Unfolding the Machine" procedure in this manual. Keep clear of the movement path of the walking deck. Hold onto the walking deck until approximately 2/3 of the movement down. The walking deck can possibly drop quickly in the last part of the movement. If you used spray lubricant, wait 5 minutes before turning on power to the machine to allow the aerosol to dissipate. 8. Connect the power cord back into the machine and then into the wall outlet. 9. Turn on the power to the machine with the power switch. 10. Stay to one side of your machine and start the belt at the slowest speed. Let the belt operate for approximately 15 seconds. Be sure not to touch a moving walking belt or step on the power cord. Keep bystanders and children away from the product you are servicing at all times. 11. Switch off your machine. 12. Take care to clean up any excess lubricant from the deck. To decrease the possibility of slipping, be sure the deck area is free from grease or oil. Clean off any excess oil from the machine surfaces. Heart Rate Chest Strap Battery Replacement The heart rate (HR) chest strap uses a CR2032 battery. Do not perform this procedure outdoors or in moist or wet locations. 1. Using a coin, loosen the slotted cover on the battery bay. Remove the cover and battery. 2. When replacing the battery, insert it in the battery bay with the + symbol facing up. 3. Reinstall the cover on the strap. 4. Discard the old battery. Dispose of in accordance with local regulations and/or at approved recycling centers. 5. Inspect your chest strap to ensure function. CR2032 + Do not use until the equipment has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
49
performance. We can recommend that you use the following:
• 8300 Silicone Spray, available at most Hardware and Auto Parts stores.
• Lube-N-Walk
®
Treadmill Lubrication Kit, available from your local specialty fitness dealer or Nautilus, Inc.
Store silicone lubricant in a safe place. Keep out of reach of children. Silicone lubricant is not intended for
human consumption.
6.
Manually rotate the belt 1/2 of the length of the belt and apply lubricant again.
7.
Unfold the machine. Refer to the “Unfolding the Machine” procedure in this manual.
Keep clear of the movement path of the walking deck. Hold onto the walking deck until approximately 2/3 of
the movement down. The walking deck can possibly drop quickly in the last part of the movement.
If you used spray lubricant, wait 5 minutes before turning on power to the machine to allow the aerosol to
dissipate.
8.
Connect the power cord back into the machine and then into the wall outlet.
9.
Turn on the power to the machine with the power switch.
10. Stay to one side of your machine and start the belt at the slowest speed. Let the belt operate for approximately 15
seconds.
Be sure not to touch a moving walking belt or step on the power cord. Keep bystanders and children away
from the product you are servicing at all times.
11.
Switch off your machine.
12. Take care to clean up any excess lubricant from the deck.
To decrease the possibility of slipping, be sure the deck area is free from grease or oil. Clean off any excess
oil from the machine surfaces.
Heart Rate Chest Strap Battery Replacement
The heart rate (HR) chest strap uses a CR2032 battery.
Do not perform this procedure outdoors or in moist or
wet locations.
1.
Using a coin, loosen the slotted cover on the battery bay. Re-
move the cover and battery.
2.
When replacing the battery, insert it in the battery bay with the
+ symbol facing up.
3.
Reinstall the cover on the strap.
4.
Discard the old battery. Dispose of in accordance with local
regulations and/or at approved recycling centers.
5.
Inspect your chest strap to ensure function.
Do not use until the equipment has been fully assembled and inspected for correct performance in
accordance with the Owner’s Manual.
CR2032
+