Schwinn A10 Upright Bike Owner's Manual - Page 15

Fan (if equipped) will not turn on or will not turn off Check data cable integrity All wires in cable should be intact. If any are cut or crimped, replace cable. Check data cable connections/orientation Insure cable is connected securely and oriented properly. Small latch on connector should line up and snap into place. Reset Machine (if equipped with reset button) Unplug unit from electrical outlet for 3 minutes. Reconnect to outlet. After Console powers up, press "reset". If bike has batteries, check Battery Indicator on console If the battery level shows low or no power, replace or check batteries. the batteries. Fan (if equipped) will not turn on, but Console operates Check for blockage of fan Turn power off (remove batteries or unplug power adapter). Remove material from fan. If necessary, detach the Console to help with removal. Replace the Console if unable to remove blockage. Unit rocks/does not sit level Check leveler adjustment Leveling feet may be turned to level bike. Check surface under unit Adjustment may not be able to compensate for extremely uneven surfaces. Move bike to level area. Pedals loose/unit difficult to pedal Check pedal to crank connection Pedal should be tightened securely to crank. Insure connection is not cross-threaded. Check crank to axle connection Crank should be tightened securely to axle. Be sure cranks are connected at 180 degrees from each other. Seat post movement Check locking pin Insure adjustment pin is locked into one of the seat post adjustment holes. Check adjustment knob Insure knob is securely tightened. 15