Schwinn Airdyne AD Pro Assembly and Owner s Manual - Page 6

SPECIFICATIONS user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Specifications Maximum User Weight: Machine Weight: 350 lbs. (159 kg) 113 lbs. (51.3 kg) Power Requirements: Operating Voltage: 2 D Batteries (LR20) 3VDC Regulatory Approvals: Optional AC Power Adapter: U L listed, Rated 120V 60Hz Input, 9VDC, 1500mA Output. Class 2. 52.1" 132.4 cm 41.6" 105.6 cm 19.7" 50 cm This product, its packaging, and components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is provided in accordance with California's Proposition 65. If you would like additional information, please refer to our website at www.nautilus.com/prop65. Before Assembly Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a hard, level surface. Allow a workout area of a minimum 68" (1.7 m) x 90" (2.3 m). Basic Assembly Tips Follow these basic points when you assemble your machine: • Read and understand the "Important Safety Instructions" before assembly. • Collect all the pieces necessary for each assembly step. • Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclock- wise) to loosen, unless instructed otherwise. • When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. • The assembly requires 2 people. 6