Schwinn Crewmaster Rowing Machine Assembly and Owners Manual - Page 23
Troubleshooting
View all Schwinn Crewmaster Rowing Machine manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
TROUBLESHOOTING Condition/Problem Console will not power up/ turn on/start Things to Check Check batteries. Check data cable integrity Check data cable connections/orientation Check console display for damage Speed displayed is not accurate Check RPM Sensor Magnet position (requires seat removal) Speed displayed is always Data cable "0"/stuck in Pause mode RPM Sensor No Count/RPM reading Check data cable integrity Check data cable connections/orientation Check RPM Sensor Magnet position (requires seat removal) Check RPM Sensor Assembly Distance displayed is not Check Distance units accurate Console display is dim Unit operates but Telemetric Heart Rate not displayed Batteries Chest Strap (optional) Check data cable integrity Check data cable connections/orientation Check Telemetry HR Receiver Chest Strap Batteries Interference Replace Chest Strap Replace Console Solution Make sure batteries are installed correctly. If batteries are correctly installed, replace with a set of new batteries. All wires in cable should be intact. If any are visibly crimped or cut, replace cable. Make sure cable is connected securely and oriented properly. Small latch on connector should line up and snap into place. Check for visual sign that console display is cracked or otherwise damaged. Replace Console if damaged. If the above steps do not resolve the problem, contact Customer Service (if inside US/Canada) or your local distributor (if outside US/Canada). RPM Sensor Magnet should be in place on Seat slider frame. Make sure the data cable is connected to the back of the Console and the main frame assembly. Make sure the RPM Sensor Magnet and the RPM Sensor are in place. All wires in cable should be intact. If any are cut or crimped, replace cable. Be sure cable is connected securely and oriented properly. Small latch on connector should line up and snap into place. RPM Sensor Magnet should be in place on Seat slider frame. RPM Sensor Assembly should be aligned with magnets and connected to data cable. Realign sensor if necessary. Replace if there is any damage to the sensor or the connecting wire. The later version of the Console shows the Distance (DIST) in kilometers (K). The earlier version shows DIST in miles (M). 1 mile = 1.61 km Replace batteries Strap should be "POLAR®" compatible and uncoded. Make sure strap is directly against skin and contact area is wet. All wires in cable should be intact. If any are visibly crimped or cut, replace cable. Be sure cable is connected securely and oriented properly. Small latch on connector should line up and snap into place. Telemetry HR Receiver should be in place on Rail Assembly. Check for visual sign that HR Receiver is damaged. Replace HR Receiver if damaged. If strap has replaceable batteries, install new batteries. Try moving unit away from sources of interference (TV, Microwave, etc). If interference is eliminated and HR does not function, replace strap. If HR still does not function, replace Console. 23