Schwinn IC2 Indoor Cycling Bike Assembly and Owner's Manual
Schwinn IC2 Indoor Cycling Bike Manual
View all Schwinn IC2 Indoor Cycling Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn IC2 Indoor Cycling Bike manual content summary:
- Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 1
Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 2
the Bike 14 Important Safety Instructions - Owner's 15 Features 16 Emergency Stop 17 Console Features 17 Operations 19 Adjustments 19 Workout Mode 20 Pausing or Stopping 20 Service Mode 21 Maintenance 22 Chain Lubrication 24 Replacing the Console Batteries 24 Troubleshooting - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 3
parts and hardware supplied by Nautilus. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 4
Safety Warning Labels and Serial Number 250lbs. (113kg 250lbs. (113kg). • • 4 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 5
Using the recommended wrenches, turn the bolts and nuts to the right (clockwise) to tighten, and the left (counterclockwise) to loosen, unless instructed otherwise. 4. When attaching 2 pieces, lightly lift and look through the bolt holes to help insert the bolt through the holes. 5. The assembly - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 6
PARTS 9 11 1 10 8 7 6 2 3 4 5 Item Qty Description 1 1 Main Frame 2 1 Front Stabilizer 3 1 Rear Stabilizer 4 1 Pedal, Right 5 1 Pedal, Left 6 1 Seat Item Qty Description 7 1 Seat Post 8 1 Handlebar Post 9 1 Handlebar 10 1 Water Bottle Holder 11 1 Console 6 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 7
HARDWARE / TOOLs Item Qty Description A 4 Button Head Hex Screw M8 x 56 B 2 Button Head Hex Screw M8 x 20 C 8 Flat Washer M8 D 2 Lock Nut M8 E 2 Pan Head Phillips Screw M6 x 50 F 2 Flat Washer M6 Tools Included Not Included 6 mm (recommended) 7 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 8
ASSEMBLY 1. Attach Stabilizers to Frame Assembly 1 2 A C C A 3 C D 8 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 9
2. Attach Seat to Seat Post and Frame NOTICE: S lide the Seat (6) onto the Seat Post (7) and install the Seat Post in the Frame. Make sure the adjustment knob (7a) engages the holes in the Seat Post. Be sure the Seat is straight. Tighten the bolt (6b) and nut (6c) on the Seat bracket (6a) to hold - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 10
3. Attach Handlebars to Handlebar Post 9 8 C B 4. Install Handlebar Assembly on Frame NOTICE: M ake sure the adjustment knob (8a) engages the holes in the Handlebar Post. 8a 10 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 11
5. Attach Pedals to Frame Assembly Note: T he Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". 4 5 11 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 12
6. Attach Water Bottle Holder to Handlebar E F 10 7. Install Batteries in Console Note: T he console uses AA size batteries (LR6), which are not included. Make sure that the batteries point in the direction of the +/- indicators in the battery bay. X2 + - 12 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 13
8. Connect and Attach the Console NOTICE: D o not crimp Console Cable. 11 13 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 14
Safety Warning Labels and Serial Number section of this manual. ! Do not use or put the machine into service until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. Leveling the Bike Levelers are found on each side of the stabilizers - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 15
Manual. Keep the Manual for future reference. Read and understand all warnings on this machine. If at any time the Warning stickers become loose, unreadable or dislodged, contact Nautilus® Customer Service for replacement stickers. • Children must not be let on or near to this machine. Moving parts - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 16
FEATURES A O N B C D E J K M H G L I F C G A Console B Handlebar Assembly C Adjustment Knob D Brake/Resistance Knob E Seat F Seat Slider G Stabilizers H Levelers H I Pedals J Flywheel K Brake Assembly L Chain Guard M Transport Wheels N Battery Bay O Water Bottle Holder 16 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 17
the button to get access to information about console settings. Front Back LCD Battery bay START / RESET WARNING: If you feel any unusual pain, shortness of breath or dizziness, consult your physician. Start Reset Cable connector START/RESET Push to start, or to stop an active workout and - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 18
is more, the display starts again at 0.00. Note: To change the measurement units to English Imperial or metric, refer to the "Service Mode" section in this manual. Speed The SPEED display field shows the machine speed in kilometers per hour (km/h) or miles per hour (mph), to one decimal place - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 19
-soled athletic shoes or appropriate cycling shoes. You will need the appropriate clothes for exercise that allow you to move freely. How Often Should You Exercise ! Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 20
Handlebar Adjustment Loosen and pull the adjustment knob on the handlebar mount. Adjust the handlebar assembly to the desired height. Release the adjustment knob to engage the locking pin. Be sure that the pin is fully engaged and fully tighten the knob. ! Do not lift the Handlebar Post above the - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 21
). 1. When the Console is in Workout Mode or Pause Mode, push and hold down the button for 5 seconds to go into Service Mode. Note: Tap the button to move through the Service Mode Menu options. When the Console display shows "dOnE", push and hold the button for 3 seconds to reset the workout - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 22
instructions nautilus.com/prop65. Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition. Repair or replace all parts are tight. Tighten as necessary. Lubricate chain with bike chain oil. NOTICE: D o not clean with - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 23
Maintenance Parts A R A R K T B C D E F S N M I J K H F G Q R O NP G L M A Console B Handlebars C Brake/Resistance Knob D Brake Assembly E Chain Guard F Chain Guard Inside G Crank Arms H Pedals I Seat J Seat Post K Adjustment Knob L Chain Guard Door M Levelers N - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 24
Chain Lubrication Remove the chain guard door and apply a few drops of bike chain oil to the chain. ! Do not apply oil when the chain is moving. Note: Use caution to avoid staining clothes or carpet. Replacing the - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 25
Troubleshooting Condition/Problem Things to Check Console will not power up/turn Batteries on/start Speed displayed is not accurate Speed displayed is always "0"/ stuck in Pause mode - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 26
Seat post movement Check leveler adjustment Leveling feet may be turned in or out to level bike. Check surface under unit Adjustment may not be able to compensate for extremely uneven surfaces. Move bike to level area. Check pedal to crank connec- Pedal should be tightened tion securely to - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 27
27 - Schwinn IC2 Indoor Cycling Bike | Assembly and Owner's Manual - Page 28
Nautilus® 004-4625.060611.A Bowflex® Schwinn® Fitness Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
http://www.schwinnfitness.com