Seagate ST15150N Product Manual - Page 13
Applicable standard and, reference documentation
View all Seagate ST15150N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ST15150N/ND/W/WD/WC/DC Product Manual, Rev. D 3 2.0 Applicable standard and reference documentation Seagate takes all reasonable steps to insure that its products are certifiable to currently accepted standards. Typical applications of these disc drives include customer packaging and subsystem design. Safety agencies conditionally certify component parts, such as the Barracuda disc drive, based on their final acceptability in the end-use product. The subsystem designer is responsible for meeting these conditions of acceptability in obtaining safety/regulatory agency compliance in their end use product and certifying where required by law. 2.1 Standards The Barracuda disc drive is a UL recognized component per UL1950, CSA certified to CSA C22.2 No. 950-M89, and VDE certified to VDE 0805 and EN60950. If this model has the CE Marking, it complies with the European Union requirements of the Electromagnetic Compatibility Directive 89/336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and Directive 93/68/EEC of 22 July 1993. Seagate uses an independent laboratory to confirm compliance to the above directives. Drives are tested in representative systems for typical applications. The selected system represents the most popular characteristics for test platforms. The system configurations include: • 486, Pentium, and PowerPC Microprocessors • 3.5-inch floppy disc drive • Keyboard • Monitor/display Although the test system with this Seagate model complies to the directives, we cannot guarantee that all systems will comply. The computer manufacturer or system integrator shall confirm EMC compliance and provide CE Marking for their product. The Barracuda disc drive is supplied as a component part. It is the responsibility of the subsystem designer to meet EMC/regulatory requirements. Engineering test characterizations of radiated emissions are available from the Seagate safety department. 2.2 Applicable reference documents Barracuda 4 Installation Guide Seagate part number: 83328870 SCSI-2 Interface Product Manual (volume 2) Seagate part number: 77738479 ANSI small computer system interface (SCSI) documents ANSI X3.131-1986 (SCSI-1) X3T9.2/86-109 Rev. 10H (SCSI-2) X3T9.2/91-010 Rev. 10 (SCSI-3) Parallel Interface In case of conflict between this document and any referenced document, this document takes precedence.