Seagate ST160LT007 Momentus Thin (4K) SATA Product Manual - Page 11

Table 1, Drive specifications

Page 11 highlights

Table 1: Drive specifications Drive specification Standby/Sleep mode (typical) Voltage tolerance (including noise) Ambient temperature Temperature gradient (°C per hour max) Relative humidity Relative humidity gradient Wet bulb temperature (°C max) Altitude, operating Altitude, nonoperating (meters below mean sea level, max) Shock, operating (Gs max at 2ms) Shock, nonoperating (Gs max at 2ms) Shock, nonoperating (Gs max at 1ms) Shock, nonoperating (Gs max at 0.5ms) Vibration, operating (Swept Sine) Vibration, nonoperating Drive acoustics, sound power (bels) Idle** Seek Nonrecoverable read errors Annualized Failure Rate (AFR) Load/Unload (U/UL) cycles ST320LT020 - 9YG142 ST250LT003 - 9YG14C 0.15W *** +5V ± 10% 0° to 60°C (operating), -40° to 70°C (nonoperating) 20°C (operating) 35°C (nonoperating) 5% to 95% (operating) 5% to 95% (nonoperating) 30% per hour max 37.7 (operating) 40 (nonoperating) -304.8 m to 3,048 m (-1000 ft. to 10,000+ ft.) -304.8 m to 12,192 m (-1000 ft. to 40,000+ ft.) 350 800 1000 600 1.0 Gs (0 to peak, 5-500 Hz) 5.0 Gs (0 to peak, 5-500 Hz) 2.0 (typical) 2.2 (max) 2.2 (typical) 2.4 (max) 1 per 1014 bits read 0.5% ST160LT003 - 9YG141 25°C, 50% relative humidity 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C, 10% relative humidity 55°C, 16% relative humidity Warranty Supports Hotplug operation per Serial ATA Revision 2.6 specification 600,000 software-controlled power on/off cycles 20,000 hard power on/off cycles To determine the warranty for a specific drive, use a web browser to access the following web page: http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance You will be asked to provide the drive serial number, model number (or part number) and country of purchase. After submitting this information, the system will display the warranty information for your drive. Yes (requires COMRESET from host after a hotplug event) *One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. ***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption. Momentus Thin Product Manual, Rev. C 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Momentus Thin Product Manual, Rev. C
5
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels
.
***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby
modes will not contribute to battery power consumption.
Standby/Sleep mode (typical)
0.15W ***
Voltage tolerance (including noise)
+5V ± 10%
Ambient temperature
0° to 60°C (operating), –40° to 70°C (nonoperating)
Temperature gradient
(°C per hour max)
20°C (operating)
35°C (nonoperating)
Relative humidity
5% to 95% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
30% per hour max
Wet bulb temperature
(°C max)
37.7 (operating)
40 (nonoperating)
Altitude, operating
–304.8 m to 3,048 m (–1000 ft. to 10,000
+
ft.)
Altitude, nonoperating
(meters below mean sea level, max)
–304.8 m to 12,192 m (–1000 ft. to 40,000
+
ft.)
Shock, operating (Gs max at 2ms)
350
Shock, nonoperating (Gs max at 2ms)
800
Shock, nonoperating (Gs max at 1ms)
1000
Shock, nonoperating (Gs max at 0.5ms)
600
Vibration, operating (Swept Sine)
1.0 Gs (0 to peak, 5–500 Hz)
Vibration, nonoperating
5.0 Gs (0 to peak, 5–500 Hz)
Drive acoustics, sound power (bels)
Idle**
2.0 (typical)
2.2 (max)
Seek
2.2 (typical)
2.4 (max)
Nonrecoverable read errors
1 per 10
14
bits read
Annualized Failure Rate (AFR)
0.5%
Load/Unload (U/UL) cycles
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
Warranty
To determine the warranty for a specific drive, use a web browser to access the following
web page:
http://www.sea
gate.com/www/en-us/support/warranty_&_returns_assistance
You will be asked to provide the drive serial number, model number (or part number)
and country of purchase. After submitting this information, the system will display the
warranty information for your drive.
Supports Hotplug operation per Serial ATA
Revision 2.6 specification
Yes (requires COMRESET from host after a hotplug event)
Table 1:
Drive specifications
Drive specification
ST320LT020 - 9YG142
ST250LT003 - 9YG14C
ST160LT003 - 9YG141