Home » Seagate Manuals » Hard Drives » Seagate ST160LT007 » Manual Viewer

Seagate ST160LT007 Momentus Thin (4K) SATA Product Manual - Page 8

Introduction

Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

2.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus® Thin model drives: ST model # Part # Standard models ST320LT020 9YG142 ST250LT003 9YG14C ST160LT003 9YG141 These drives provide the following key features: • 5400-RPM spindle speed. • 16MB buffer. • Quiet operation. Fluid Dynamic Bearing (FDB) motor. • High instantaneous (burst) data-transfer rates (up to 3Gb/s). • Perpendicular recording technology. • State-of-the-art cache and on-the-fly error-correction algorithms. • Native Command Queuing (NCQ) with command ordering. • Full-track multiple-sector transfer capability without local processor intervention. • 1000 Gs nonoperating shock and 350 Gs of operating shock. • SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns. • The 3D Defense System™, which includes Drive Defense, Data Defense and Diagnostic Defense, offers the industry's most comprehensive protection for disk drives. • Support for S.M.A.R.T. drive monitoring and reporting. • Support for Read Multiple and Write Multiple commands. 2 Momentus Thin Product Manual, Rev. C

Section	Page
1.0 Seagate Technology support services	7
2.0 Introduction	8
2.1 About the Serial ATA interface	9
3.0 Drive specifications	10
3.1 Specification summary table	10
3.2 Formatted capacity	12
3.2.1 LBA mode	12
3.3 Default logical geometry	12
3.4 Physical organization	12
3.5 Recording and interface technology	13
3.6 Physical characteristics	13
3.7 Seek time	13
3.8 Start/stop times	14
3.9 Power specifications	14
3.9.1 Power consumption	14
3.9.1.1 Typical current profile	15
3.9.2 Deferred spinup	15
3.9.3 Conducted noise	15
3.9.4 Voltage tolerance	15
3.9.5 Power-management modes	16
3.10 Environmental specifications	17
3.10.1 Ambient temperature	17
3.10.2 Temperature gradient	17
3.10.3 Humidity	17
3.10.3.1 Relative humidity	17
3.10.3.2 Wet bulb temperature	17
3.10.4 Altitude	17
3.10.5 Shock	18
3.10.5.1 Operating shock	18
3.10.5.2 Nonoperating shock	18
3.10.6 Vibration	18
3.10.6.1 Operating vibration	18
3.10.6.2 Nonoperating vibration	18
3.11 Acoustics	19
3.12 Electromagnetic immunity	19
3.13 Reliability	20
3.14 Agency certification	20
3.14.1 Safety certification	20
3.14.2 Electromagnetic compatibility	20
3.14.3 FCC verification	21
3.15 Environmental protection	22
3.15.1 European Union Restriction of Hazardous Substances (RoHS)	22
3.15.2 China Restriction of Hazardous Substances (RoHS) Directive	22
3.16 Corrosive environment	22
4.0 Configuring and mounting the drive	23
4.1 Handling and static-discharge precautions	23
4.2 Configuring the drive	23
4.3 Serial ATA cables and connectors	24
4.4 Drive mounting	24
5.0 Serial ATA (SATA) interface	26
5.1 Hot-Plug compatibility	26
5.2 Serial ATA device plug connector pin definitions	26
5.3 Supported ATA commands	28
5.3.1 Identify Device command	30
5.3.2 Set Features command	33
5.3.3 S.M.A.R.T. commands	34
Index	35
A	35
B	35
C	35
D	35
E	35
F	35
G	35
H	36
I	36
K	36
L	36
M	36
N	36
O	36
P	36
Q	36
R	36
S	37
T	37
U	37
V	37