Seagate ST32000641AS Barracuda XT Series SATA Product Manual - Page 10

Drive specification Voltage tolerance (including noise) Operating temperature (Drive Case temperature) Nonoperating temperature (Ambient) Temperature gradient (max) Relative humidity Relative humidity gradient (max) Wet bulb temperature (max) Altitude, operating Altitude, nonoperating (below mean sea level, max) Operational Shock (max) Non-Operational Shock (max) Vibration, operating Vibration, nonoperating Drive acoustics, sound power Idle** Performance Nonrecoverable read errors Warranty Load-unload cycles Supports Hotplug operation per the Serial ATA Revision 2.6 specification ST32000641AS 5V + 5% 12V + 10% 0° to 60°C -40° to 70°C 20°C per hour max (operating) 30°C per hour max (nonoperating) 5% to 95% (operating) 5% to 95% (nonoperating) 30% per hour 37.7°C max (operating) 40.0°C max (nonoperating) -60.96m to 3,048m (-200 ft to 10,000+ ft) -60.96m to 12,192m (-200 ft to 40,000+ ft) 63 Gs at 2ms 300 Gs at 2ms 5 to 350Hz: 0.50 Gs 350 to 500Hz: 0.25 Gs 5 to 350Hz: 5.0 Gs 350 to 500Hz: 2.0 Gs 2.7 bels (typical) 2.9 bels (max) 2.9 bels (typical) 3.3 bels (max) 1 per 1014 bits read To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive. 300,000 at 25°C, 50% rel. humidity Yes *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. 4 Barracuda XT Series SATA Product Manual, Rev. C