Seagate ST3300657SS Cheetah 15K.7 FC Product Manual
Seagate ST3300657SS - Cheetah 300 GB Hard Drive Manual
UPC - 715663214328
View all Seagate ST3300657SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Seagate ST3300657SS manual content summary:
- Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 1
Product Manual Cheetah 15K.7 FC Standard models ST3600057FC ST3450857FC ST3300657FC Self-Encrypting Drive models ST3600957FC ST3450757FC ST3300557FC 100516225 Rev. B January 2010 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 2
© 2010, Seagate Technology LLC All rights reserved. Publication number: 100516225, Rev. B January 2010 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Cheetah and SeaTools are either trademarks or - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 3
5.1.2 Unrecoverable Errors 13 5.1.3 Seek errors 14 5.1.4 Interface errors 14 5.2 Reliability and service 14 5.2.1 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF) . dissipation 26 6.4 Environmental limits 28 6.4.1 Temperature 28 Cheetah 15K.7 FC Product Manual, Rev. B i - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 4
download 37 7.8 Power requirements 37 7.9 Supported commands 37 8.0 Defect and error management FC-AL features 46 10.1.1 Fibre Channel link service frames 46 10.1.2 Fibre Channel task management options 52 10.2 Dual port support 52 10.3 SCSI commands supported 52 10.3.1 Inquiry data 57 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 5
characteristics 70 10.6.1 TTL input characteristics 70 10.6.2 LED driver signals 71 10.6.3 FC Differential output 71 10.6.4 FC Differential input 71 11.0 Seagate Technology support services 73 Cheetah 15K.7 FC Product Manual, Rev. B iii - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 6
iv Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 7
support the Fibre Channel Arbitrated Loop and SCSI Fibre Channel Protocol specifications to the extent described in this manual. The Fibre Channel Interface Manual information in this manual applies to standard and Self-Encrypting Drive models. Model Number ST3600057FC ST3450857FC ST3300657FC - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 8
standards as noted in the appropriate sections of this manual and the Seagate Fibre Channel Interface Manual, part number 100293070. The drives are recognized in additional vendor-unique features as noted in this product manual. 2.1.1 Electromagnetic compatibility The drive, as delivered, - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 9
manufacturing operations, laboratory analytical validation testing, and an internal auditing process to ensure that all standard operating procedures are complied with. Cheetah 15K.7 FC Product Manual, Rev. B 3 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 10
Specification for 40-pin SCA-2 Connector with Bidirectional Enclosure Services Interface ANSI Small Computer System Interface (SCSI) Documents SSC Specification (draft) Self-Encrypting Drives Users Guide Seagate part number: 100515636 Specification for Acoustic Test .7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 11
support the Fibre Channel Arbitrated Loop (FC-AL) and SCSI Fibre Channel Protocol as described in the ANSI specifications, this document, and the Fibre Channel Interface Manual Note. Never disassemble the HDA and do not attempt to service items in the sealed enclosure (heads, media, actuator, etc.) - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 12
or through interface com- mands. Jumpers are not used on the drive. • Supports SCSI Enclosure Services through the interface connector • Fibre Channel worldwide name uniquely identifies the drive and each for a drive that will be repurposed or scrapped 6 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 13
size is selectable at format time and must be one of the supported sizes listed in the table below. Seagate designs specify capacity points at operating points for this product are: ST3600057FC ST3600957FC ST3450857FC ST3450757FC ST3300657FC ST3300557FC Sector Size Product Manual, Rev. B 7 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 14
command, the drive can change its capacity to something less than maximum. See the Mode Select Parameter List table in the SCSI Commands Reference Manual. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 15
interface" on page 63 and the Fibre Channel Interface Manual (part number 77767496) for additional timing details. 4.2.1 to be increased by 30 minutes. Maximum (with verify) Maximum (without verify) ST3600057FC 119 60 ST3450857FC 88 44 ST3300657FC 58 29 Note. There is approximately a 1.5 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 16
maximum) from removal of DC power. If the Motor Start option is enabled, the internal controller accepts the commands listed in the Fibre Channel Interface Manual less than 3 seconds after DC power has been applied. After the Motor Start command has been received, the drive becomes ready for normal - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 17
the buffer. If the cache is enabled (see RCD bit in the FC Interface Manual ), data requested by the host with a read command is retrieved from the buffer Page 02h (disconnect/reconnect control) in the Fibre Channel Interface Manual. The following is a simplified description of the prefetch/cache - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 18
a prefetch hit will likely occur. The drive disables prefetch when it decides that a prefetch hit is not likely to occur. 12 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 19
"FC Differential input." on page 71 0.55% None required 5.1 Error rates The error rates stated in this manual assume the following: • The drive is operated in accordance with this manual using DC power as defined in paragraph 6.2, "DC power requirements." • Errors caused by host system failures - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 20
for a loop of devices is the sum of the individual device error rates. 5.2 Reliability and service You can enhance the reliability of Cheetah 15K.6 disc drives by ensuring that the drive receives adequate cooling is running. If the bypass circuit is 14 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 21
will issue to the host an 01-5Dxx sense code. The error code is preserved through bus resets and power cycles. Cheetah 15K.7 FC Product Manual, Rev. B 15 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 22
the rounding of the parameter field. Table 1: Temperature Log Page (0Dh) Parameter Code 0000h 0001h Description Primary Temperature Reference Temperature 16 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 23
reports a fault condition. If the drive fails the test, remove it from service and return it to Seagate for service. 5.2.6.1 DST failure definition The drive will present a "diagnostic failed" condition through test) in bytes 1, bits 5, 6, and 7. Cheetah 15K.7 FC Product Manual, Rev. B 17 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 24
results values log. All other abort mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition). 18 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 25
warranty for a particular drive can be determined by calling Seagate Customer Service at 1-800-468-3472. You can also determine remaining warranty using the repair and return information Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 26
about 30mA and a commensurate increase of about 150mW in power consumption. There is no additional drain on the 12V supply. 20 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 27
Table 2: ST3600057FC DC power requirements Voltage Regulation Avg idle current DCX Maximum starting current (peak DC) DC (peak AC) AC Delayed motor 0.04 0.61 1.04 0.53 1.07 0.57 2.80 1.40 (Amps) +12V [2] ±5% [2] 0.69 1.85 3.49 0.04 1.03 1.07 2.84 Cheetah 15K.7 FC Product Manual, Rev. B 21 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 28
be available to each device. 4. Parameters, other than spindle start, are measured after a 10-minute warm up. 5. No terminator power. 22 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 29
and +5V current profiles are shown in the following figures. Note: All times and currents are typical. See Section 6.2 for maximum current requirements. Figure 1. Typical ST3600057FC current profiles Cheetah 15K.7 FC Product Manual, Rev. B 23 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 30
Figure 2. Typical ST3450857FC current profiles 24 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 31
Figure 3. Typical ST3300657FC current profiles Cheetah 15K.7 FC Product Manual, Rev. B 25 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 32
read the corresponding +5 volt current, +12 volt current, and total watts on the vertical axis. To calculate BTUs per hour, multiply watts by 3.4123. Figure 4. ST3600057FC DC current and power vs. input/output operations per second 26 Cheetah 15K.7 FC Product - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 33
. To calculate BTUs per hour, multiply watts by 3.4123. Figure 5. ST3450857FC DC current and power vs. input/output operations per second Cheetah 15K.7 FC Product Manual, Rev. B 27 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 34
in its final mechanical configuration, perform random write/read operations and measure the HDA case temperature after it has stabilized. 28 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 35
-1,000 to +10,000 feet (-305 to +3,048 meters) b. Non-operating -1,000 to +40,000 feet (-305 to +12,210 meters) Cheetah 15K.7 FC Product Manual, Rev. B 29 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 36
>1800 cu in (>19,700 cu cm) >600 cu in (>9,800 cu cm) Packaged/product weight Any 0-20 lb (0 to 9.1 kg) 0-20 lb (0 to 9.1 kg) 20-40 lb mm) 36 in (914 mm) Drives packaged in single or multipacks with a gross weight of 20 pounds (8.95 kg) or less by Seagate for general freight shipment shall - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 37
Z Y X X Z Y Figure 8. Recommended mounting Cheetah 15K.7 FC Product Manual, Rev. B 31 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 38
assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca- 32 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 39
validation testing, and an internal auditing process to ensure that we comply with all standard operating procedures. 6.4.9 Electromagnetic susceptibility See Section 2.1.1.1. Cheetah 15K.7 FC Product Manual, Rev. B 33 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 40
for detailed physical dimensions. See Section 9.4, "Drive mounting."" Height: 1.03 in Width: 4.00 in Depth: 5.79 in Weight (max): 1.76 pounds 26.10 mm 101.60 mm 147 mm 0.80 kilograms H // T -Z- S REF [1] A T .015 max 0.38 max U .015 max 0.38 max 34 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 41
the "Admin SP" and the "Locking SP." These act as gatekeepers to the drive security services. Security-related commands will not be accepted unless they also supply the correct credentials to prove the password or the MSID (Makers Secure ID) password. Cheetah 15K.7 FC Product Manual, Rev. B 35 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 42
change the Encryption Key (see Section 7.6) or the password when required. The bands should be aligned to 4K LBA boundaries. 36 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 43
supply. See the tables in Section 6.2 for power requirements on the standard (non-SED) drive models. 7.9 Supported commands The SED models support the following two commands in addition to the commands supported by the standard (non-SED) models as listed in Table 16: • Security Protocol Out (B5h - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 44
"P" and "G" lists may be referenced by the initiator using the Read Defect Data command. Details of the SCSI commands supported by the drive are described in the Fibre Channel Interface Manual. Also, more information on the drive Error Recovery philosophy is presented in the Fibre Channel Interface - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 45
the Read Retry Count, Write Retry Count, and Recovery Time Limit parameters. However, the drive does not report any unrecovered errors. Cheetah 15K.7 FC Product Manual, Rev. B 39 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 46
counts to a value below the default setting could result in an increased unrecovered error rate which may exceed the value given in this product manual. A setting of zero (0) will result in the drive not performing error recovery. For example, suppose the Read/Write Recovery page has the RC bit - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 47
. In RAID arrays, BMS allows hot spare drives to be scanned for defects prior to being put into service by the host system. On regular duty drives, if the host system makes use of the BMS Log command is being attempted to a previously failing location. Cheetah 15K.7 FC Product Manual, Rev. B 41 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 48
the data to the original location. If a verification of this rewrite fails, the sector is re-mapped to a spare location. 42 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 49
with the drive in horizontal (discs level) and vertical (drive on its side) orientations, which are the two preferred mounting orientations. Cheetah 15K.7 FC Product Manual, Rev. B 43 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 50
flows in the direction shown or in reverse direction (side to side) Figure 10. Air flow Above unit Under unit 44 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 51
available may not have a mechanical structure capable of mounting the drive so that it can meet the shock and vibration specifications listed in this manual. 9.5 Grounding Signal ground (PCBA) and HDA ground are connected together in the drive and cannot be separated by the user. The equipment in - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 52
provided in the Fibre Channel Interface Manual (part number 100293070). 10.1 FC-AL features This section lists the Fibre Channel-specific features supported by Cheetah 15K.7 FC drives. 10.1.1 Fibre Channel link service frames Table 6 lists the link services supported by Cheetah 15K.7 FC drives - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 53
Protocol (FC SCSI FCP) task management functions supported. Table 7: Fibre Channel SCSI FCP task ACA Target reset Clear task set Abort task set Supported No Yes Yes Yes Yes 10.1.3 Fibre Channel supported. Table 8: FC SCSI FCP response codes Function name Function complete Function not supported - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 54
offset Not checked. Port Login Accept will return a 0-not supported. Valid version level x N_Port/F_Port Must = 0, N_Port Alternate The node name is not checked or saved by the drive. SO Service options Class 3 only. MSB Class valid Must = 1 Intermix x Stacked .7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 55
XX XX XX XX XX XX XX XX 16-19 00 00 00 22 XX Indicates fields that are not used. Cheetah 15K.7 FC Product Manual, Rev. B 49 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 56
appears in the Port Name and Node Name fields. P Port identifier field. 1 FLOGI originated on Port A. 2 FLOGI originated on Port B. 50 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 57
logout occurs and a LS_RJT is returned to the fabric. NN Node Name. The drive does not check or save the node name. SO Service Options-Class 3 only. MSB Class valid Must = 1 Intermix x Stacked connection req. xx Sequential delivery Must = 1 Other bits reserved xxx XX Cheetah 15K.7 FC - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 58
) the connection of Port A and B for these products must follow the requirements in their product manuals. Subject to buffer availability, the Cheetah 15K.7 FC drives support: • Concurrent port transfers-The drive supports receiving transfers on both ports at the same time when the ports are on - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 59
to SED models only) Command code 00h 01h 03h 04h 07h 08h 0Ah 0Bh 12h 15h 16h 17h 18h 1Ah Supported (Y/N) [4] Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N N Y N Y Y Y Y Y Y Y Y Y Y Command name Executable Executable Executable Executable Executable Cheetah 15K.7 FC Product Manual, Rev. B 53 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 60
diagnostic results Y N Executable Supported diagnostics pages Translate page Enclosure services page Send diagnostics page Y N Executable Supported diagnostics pages Translate page Read Condition Check Condition Executable Executable 54 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 61
WR_UNCOR = 1) Change definition Write same (10) PBdata LBdata Not used Log Select Log Sense Support Log page (00h) Write Error Counter page (02h) Read Error Counter page (03h) Check Condition Y N Executable Executable Y N Executable Executable Cheetah 15K.7 FC Product Manual, Rev. B 55 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 62
5E 5F 60-7Eh 7Fh 7Fh 7Fh 80h 81h 82h 83-8Eh 8Fh 8Fh 93h A0h A2h A3h B5h C0-DFh EO-FFh Supported (Y/N) [4] Y Y Y N N N N N Y Y Y N Y N Y N A A N Y (PI only) Y (PI only) Y (PI only) N N N N Y (PI only) Y (PI only) Y (PI only) Y makes the drive inoperable. 56 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 63
Y = Yes. Command is supported. N = No. Command is not supported. A = Support is available on special request. 10.3.1 Inquiry data Table 17 lists the Inquiry command data that the drive should return to the initiator per the format given in the Fibre Channel Interface Manual. Table 17: Bytes 0-15 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 64
of the data bytes returned by the drive in response to the Mode Sense command pages for SCSI implementation (see the Fibre Channel Interface Manual ). Definitions: SAV = Current saved value. DEF = Default value. Standard OEM drives are shipped configured this way. CHG = Changeable bits; indicates if - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 65
Table 18: Mode Sense data saved, default and changeable values for ST3600057FC drives MODE DATA HEADER: 00 be 00 10 00 00 00 08 MODE PAGES: DEF 81 0a c0 DATA: READ BUFFER 0 1 2 3 4 5 6 7 8 9 A B C D E F ASCII 000000: 45 DD 2F AF 00 00 02 00 E./.... Cheetah 15K.7 FC Product Manual, Rev. B 59 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 66
c0 8f 00 00 00 READ CAPACITY DATA: READ BUFFER 0 1 2 3 4 5 6 7 8 9 A B C D E F ASCII 000000: 34 65 F8 6F 00 00 02 00 60 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 67
b7 c0 8f 00 00 00 READ CAPACITY DATA: READ BUFFER 0 1 2 3 4 5 6 7 8 9 A B C D E F ASCII 000000: 22 EC B2 5B 00 00 02 00 Cheetah 15K.7 FC Product Manual, Rev. B 61 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 68
support column indicates the feature or condition is supported. An "N" in the support column indicates the feature or condition is not supported. Table 21: Miscellaneous features Supported queue tags supported) Deferred error offset bytes Table 22: Miscellaneous status Supported Y Y Y Y Y Y Y - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 69
provided within this section. The operational aspects of Seagate's Fibre Channel drives are provided in the Fibre Channel Interface Manual.. J1 interface connector Figure 11. Physical interface 10.5.1 Physical characteristics This section defines physical interface connector. 10.5.1.1 Physical - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 70
Channel drives use the FC-SCA connector for: • DC power • FC-AL interface • Drive select (device identification) • Option selection • Enclosure Services interface This 40-pin connector is designed to plug directly into a backpanel. External cables are not required. 10.5.4 Pin descriptions This - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 71
noise. TX Transmitter 100 TY .01 RX Differential Transfer Medium Receiver 100 .01 RY Figure 14. FC-AL transmitters and receivers Cheetah 15K.7 FC Product Manual, Rev. B 65 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 72
10.5.6 Power Power is supplied through the FC-SCA with support for +5 volts and +12 volts. All of the voltage pins in the drive connector are the same length. Four -limiting resistor. The LED and the current-limiting resistor are external to the drive. 66 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 73
the modulo 8 value of the numeric SEL ID of the drive from DC power on. The drive will not spin up. Cheetah 15K.7 FC Product Manual, Rev. B 67 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 74
bits of enclosure status and a bidirectional mode. ESI support and the mode are determined by the drive using a discovery process. Refer to the Fibre Channel Interface Manual for a description of ESI operation. 10.5.11.1 Parallel Enclosure Services Interface (ESI) The parallel ESI line is an output - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 75
105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 Cheetah 15K.7 FC Product Manual, Rev. B 69 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 76
, the drive has 10K ohm pull up resistors that default the device control code to 7 (1.0625 GHz). Table lists the supported codes. Table 28: Device control code values 2 (pin 17) 0 0 0 0 1 1 1 1 1 (pin 18) 0 0 1 4mA IOH < -1.6mA IOH < -500µA IOL < 1.6mA 70 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 77
Table 32. Table 32: FC Differential input characteristics Description Serial input voltage swing Parameter 200 < Vin < 1.300 mV Notes AC coupled Cheetah 15K.7 FC Product Manual, Rev. B 71 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 78
Minimum 2 GHz 470 ps 315 ps min. 305 ps 226 ps 4 GHz 235 ps 1581/1132 145 ps 113 ps 72 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 79
Internet For information regarding Seagate products and services, visit www.seagate.com. Worldwide support is available 24 hours daily by email for your questions. Presales Support: [email protected] Technical Support: [email protected] Warranty Support: http://www.seagate.com/www/en-us - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 80
Middle East and Africa Support Services For an extensive list of telephone numbers to technical support, presales and warranty service in Europe, the .com. Asia/Pacific Support Services For an extensive list of telephone numbers to technical support, presales and warranty service in Asia/Pacific, - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 81
64 backplane 67 Band 0 36 Cheetah 15K.7 FC Product Manual, Rev. B BandMasterX 36 basic link service frames 46 Basic_Accept (BA_ACC) 46 Basic_Reject (BA_RJT) 46 BB 48, 51 clear ACA function 47 clear task set function 47 commands supported 52 Common features 48, 51 Company ID 49, 50 Compare command - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 82
customer service dual port support 52 E Enclosure Services interface 64 Enclosure services page (01h) command 53 errors 38 extended link service frames 46 reply frames 46 Extended sense command -AL document 4 interface 43, 64 options supported 52 physical interface 63 SCA device connector, illustrated - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 83
Control page (19h) 53 Fibre Channel Interface Manual 1, 2 Fibre Channel Services 46 Field pointer bytes command 53 firmware 6 average rotational 9, 10 LBdata 55 LED driver signals 71 Link Service Reject (LS_RJT) 46 link services supported 46 Locking SP 35, 36 LockOnReset 36 Lock-unlock-cache - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 84
Mode Select command 62 Synchronized (locked) spindle operation 62 Zero latency read 62 miscellaneous status support ACA active 62 ACA active, faulted initiator 62 Busy 62 Check condition 62 Condition met/good characteristics detailed 9 general 10 78 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 85
Released (10) command 56 reliability 7 specifications 13 reliability and service 14 repair and return information 19 reporting actual retry count 62 S safety 2 SCA part numbers 64 SCSI interface commands supported 52 Search data equal command 54 high command 54 low command 54 Secure ID 35 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 86
Guide 1 self-encrypting drives 35 Self-Monitoring Analysis and Reporting Technology 7, 15 Send diagnostics page command 54 Sequential delivery 48, 51 Service Options 51 Service command 54 start/stop time 10 support services 73 Supported diagnostics pages command 54 surface stiffness Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 87
write 56 XD write extended command 56 XID reassign 48 XP write 56 Z zero latency read 62 zone bit recording (ZBR) 6 Cheetah 15K.7 FC Product Manual, Rev. B 81 - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 88
82 Cheetah 15K.7 FC Product Manual, Rev. B - Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 89
- Seagate ST3300657SS | Cheetah 15K.7 FC Product Manual - Page 90
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100516225, Rev. B, Printed in USA
Product Manual
Cheetah 15K.7 FC
100516225
Rev. B
January 2010
Standard models
ST3600057FC
ST3450857FC
ST3300657FC
Self-Encrypting Drive models
ST3600957FC
ST3450757FC
ST3300557FC