Seagate ST3600002FC Cheetah NS 10K.2 FC Product Manual - Page 70
FC-AL physical interface
![]() |
View all Seagate ST3600002FC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
9.5 FC-AL physical interface Figure 11 shows the location of the J1 Fibre Channel single connection attachment (FC-SCA). Figure 13 provides the dimensions of the FC-SCA connector. Details of the physical, electrical, and logical characteristics are provided within this section. The operational aspects of Seagate's Fibre Channel drives are provided in the Fibre Channel Interface Manual.. J1 interface connector Figure 11. Physical interface 9.5.1 Physical characteristics This section defines physical interface connector. 9.5.1.1 Physical description FIbre Channel drives may be connected in a loop together or with other compatible FC-AL devices. A maximum of 127 devices may have addresses; however, one of the addresses is reserved for a fabric port switch device. This means 126 addresses are available for FC-AL devices. More FC-AL compatible devices may physically reside on the loop, but they will not be functional because they would not be able to obtain valid addresses. Port bypass circuits (PBCs) allow devices to be inserted into unpopulated locations or removed from the loop with loop operation recovery after a brief interruption. These PBCs are located external to the FC-AL device. Figure 12 shows the relationship between the PBC and FC-AL device. Port Bypass Circuit N-1 From Previous Drive Port Bypass Circuit MUX To Next Drive Port Bypass Circuit N+1 Drive N-1 Select Serial Serial In Out Drive N Drive N+1 Figure 12. Port bypass circuit physical interconnect 64 Cheetah NS 10K.2 FC Product Manual, Rev. B
![](/manual_guide/products/seagate-st3600002fc-cheetah-ns-10k2-fc-product-manual-5661c7a/70.png)