Seagate ST38421A Product Manual - Page 14
Recording and interface technology, Physical characteristics, Seek time
View all Seagate ST38421A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
6 U4 Family Product Manual, Rev. D 1.3 Recording and interface technology Interface ATA Recording method 16/17 EPRML Recording density BPI (bits/inch) 241,000 Track density TPI (tracks/inch) Areal density (Mbits/inch2 max) 13,100 3,179 Spindle speed (RPM) (± 0.2%) 5,400 Internal data-transfer rate (Mbits/sec max) 206 I/O data-transfer rate (Mbytes /sec max) 16.6 (PIO mode 4) 66.6 (Ultra DMA mode 4) Interleave 1:1 Cache buffer (Kbytes) 256 1.4 Physical characteristics Drive Specification ST38421A, ST36421A, ST34311A, ST32112A Maximum height (mm) (inches) 26.1 1.028 Maximum width (mm) (inches) 101.8 4.020 Maximum length (mm) (inches) 147.0 5.78 Typical weight (grams) 580 (pounds) 1.2 1.5 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: • Track-to-track seek time is an average of all possible single-track seeks in both directions.